Sport Suspension Kits
The Eibach Bilstein B12 Pro-Kit E90-35-029-03-22 is a complete matched performance suspension system for the 2015–2017 Ford Mustang GT 5.0. It combines Eibach performance springs with Bilstein gas-pressure shock absorbers, providing a straightforward alternative to a height-adjustable coilover suspension. The springs and dampers are designed to work together as a complete system. The result is a sportier suspension setup with more direct handling and better-controlled body movement, without the need to individually adjust ride height or damping after installation. Eibach and Bilstein – matched as a complete system The B12 Pro-Kit combines two well-established names in suspension technology: Eibach supplies the performance springs while Bilstein provides the matching shock absorbers. The Bilstein dampers use gas-pressure and monotube technology. Combined with the Eibach springs, they form a complete spring and damper package with components specifically matched to work together. Sporty lowering without coilover adjustment The B12 Pro-Kit provides a moderate reduction in ride height compared with the factory suspension: Front axle: approx. 25 mm Rear axle: approx. 20 mm The predefined lowering is ideal for drivers looking for a sportier appearance and suspension setup without requiring individually adjustable ride height. Performance suspension developed for road use The B12 Pro-Kit is more than a set of lowering springs. By replacing both springs and shock absorbers, it creates a complete performance suspension system in which the damper characteristics are matched to the lowering springs. This makes the B12 an attractive solution for Mustang GT drivers looking for a classic, fixed performance suspension setup: install the complete system and benefit from a predefined ride height and damper setup without additional height or damping adjustment. Vehicle applications 2015–2017 Ford Mustang 6 Mustang GT 5.0 V8 Coupe and Convertible Maximum front axle load: 1105 kg Please check before ordering: The B12 Pro-Kit is intended for the Mustang GT 5.0 V8. The front axle load stated in the vehicle documents must not exceed 1105 kg. Supplied with German approval documentation The Eibach B12 Pro-Kit is supplied with German approval documentation (Gutachten). The listed vehicle applications, requirements and instructions must be observed during installation and any required inspection. Scope of delivery and product features Eibach part number E90-35-029-03-22 Eibach Bilstein B12 Pro-Kit performance suspension For 2015–2017 Mustang GT 5.0 V8 Complete spring and damper system Eibach performance springs Bilstein gas-pressure shock absorbers Monotube damper design Fixed matched damping characteristics Front lowering approx. 25 mm Rear lowering approx. 20 mm No ride-height adjustment required Front axle load up to 1105 kg Supplied with German approval documentation
The Eibach Pro-Street-S coilover suspension PSS65-35-029-01-22 combines sporty suspension tuning with individually adjustable ride height. This complete spring and damper system was developed for the 2015–2017 Ford Mustang and offers a balanced combination of handling performance, everyday usability and sporty appearance. Unlike lowering springs alone, the Pro-Street-S also replaces the factory shock absorbers. Springs and dampers are specifically matched to each other, providing improved handling characteristics together with individually adjustable ride height. Sporty handling with balanced comfort The Eibach Pro-Street-S is designed for Mustang drivers looking for a sportier driving experience and more direct suspension feedback without sacrificing everyday usability. The combination of matched performance dampers and suspension springs helps control vehicle movement and can reduce body roll during cornering as well as pitching under braking and acceleration. Continuous ride-height adjustment Ride height can be individually adjusted within the specified adjustment range: Front axle: approx. 30–50 mm Rear axle: approx. 20–40 mm This allows the lowering to be tailored to the desired appearance and the requirements of the vehicle. At the front, ride height is adjusted through threaded coilover struts. At the rear, separate springs with height adjusters and matching dampers are used. High-quality materials The Pro-Street-S uses stainless-steel damper technology and corrosion-resistant spring perches made from polyamide composite material. This construction supports reliable long-term ride-height adjustment and is designed for everyday use in varying weather conditions. Vehicle applications 2015–2017 Ford Mustang 6 Mustang 2.3 EcoBoost Mustang GT 5.0 V8 Coupe and Convertible Maximum front axle load: 1075 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1075 kg at the front and 1150 kg at the rear. This suspension is intended exclusively for the pre-facelift Mustang 6 and is not suitable for facelift models from model year 2018 onwards. Supplied with German approval documentation The Eibach Pro-Street-S is supplied with German approval documentation (Gutachten). All requirements and instructions specified in the documentation must be observed during installation, adjustment and any required inspection. Scope of delivery and product features Eibach part number PSS65-35-029-01-22 Eibach Pro-Street-S coilover suspension Complete spring and damper system for front and rear axles For 2015–2017 Mustang 6 Suitable for 2.3 EcoBoost and 5.0 GT Sport-tuned dampers Individually adjustable ride height Front lowering approx. 30–50 mm Rear lowering approx. 20–40 mm Front: threaded coilover struts Rear: separate springs with height adjusters and dampers Stainless-steel damper technology Corrosion-resistant polyamide composite spring perches Front axle load up to 1075 kg Rear axle load up to 1150 kg Supplied with German approval documentation
The KW V1 coilover suspension 10230065 is designed for Mustang drivers looking to combine sporty lowering with a complete spring and damper system specifically tuned for the vehicle. KW supplies the V1 with vehicle-specific fixed damping characteristics, so no additional rebound or compression adjustment is required. This makes the V1 particularly suitable for a performance-oriented road Mustang where more direct handling and individually adjustable ride height are desired without the need to configure adjustable dampers. Vehicle-specific damper setup The springs and dampers of the KW V1 are designed as a complete suspension system and specifically matched to the Mustang. The damping characteristics are preset and cannot be individually adjusted. Drivers looking for additional control over rebound and compression damping can find these features in the KW V3. The V1 instead focuses on KW's predefined combination of sporty handling and balanced everyday road performance. Continuous ride-height adjustment Ride height can be individually adjusted within the approved adjustment range: Front axle: approx. 30–50 mm Rear axle: approx. 20–40 mm At the front, ride height is adjusted through the threaded struts. At the rear, separate springs with height adjusters and matching dampers are used. KW inox-line stainless-steel technology The KW V1 uses KW's proven inox-line stainless-steel technology. Its stainless-steel strut construction and KW ride-height adjustment system are designed for high corrosion resistance and reliable long-term adjustment of the vehicle height. Vehicle applications 2015–2017 Ford Mustang 6 Mustang 2.3 EcoBoost Mustang 3.7 V6 Mustang GT 5.0 V8 Coupe and Convertible Maximum front axle load: 1075 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1075 kg at the front and 1150 kg at the rear. Supplied with German parts approval The KW V1 is supplied with a German parts approval (Teilegutachten, §19.3). All requirements and instructions specified in the approval document must be observed during installation, adjustment and approval. Scope of delivery and product features KW part number 10230065 KW V1 Street Performance coilover suspension For 2015–2017 Mustang 6 Vehicle-specific fixed damper setup No separate rebound or compression adjustment Front lowering approx. 30–50 mm Rear lowering approx. 20–40 mm Height adjustable at front and rear Front: threaded coilover struts Rear: separate springs with height adjusters and dampers KW inox-line stainless-steel technology Front axle load up to 1075 kg Rear axle load up to 1150 kg Supplied with German parts approval (Teilegutachten, §19.3)
The KW V3 Clubsport coilover suspension 35230865 is designed for Mustang drivers who not only enjoy their car on the road but also want the ability to specifically tune the suspension for track days and circuit use. The Clubsport combines extensive motorsport-oriented adjustment with a German parts approval. Rebound and compression damping can be adjusted independently, allowing the suspension setup to be tailored to the vehicle, tyres, track conditions and individual driving preferences. KW V3 Clubsport – individually adjustable Rebound damping can be adjusted through 16 clicks, allowing the driver to fine-tune suspension movement and body control. Independently of the rebound setting, low-speed compression damping can be adjusted through 12 clicks. This allows the setup to be adapted to different tyres, vehicle weights and track conditions. The independent rebound and compression adjustment provides considerably greater setup flexibility than a conventional road-oriented coilover suspension. Developed for track days KW develops its Clubsport suspension systems using technology transferred directly from motorsport. The basic setup is designed for demanding circuit use and can then be individually adapted to the vehicle and operating conditions. This makes the V3 Clubsport particularly suitable for Mustangs that are driven on the road but also regularly used for track days or performance driving events. Continuous ride-height adjustment Ride height can be individually adjusted within the approved adjustment range. At the front, height adjustment is provided through threaded struts, while the rear uses separate springs with height adjusters and matching dampers. Front KW top mounts included This version of the KW V3 Clubsport is supplied with KW top mounts for the front axle. The motorsport-oriented top mounts provide more precise wheel control and are included as part of this suspension system. KW inox-line The suspension uses KW's proven inox-line stainless-steel technology. Its high-quality construction is designed to maintain reliable height adjustment and withstand the demands of performance-oriented vehicle use. Vehicle applications 2015–2017 Ford Mustang 6 Mustang 2.3 EcoBoost Mustang 3.7 V6 Mustang GT 5.0 V8 Coupe and ConvertibleMaximum front axle load: 1075 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1075 kg at the front and 1150 kg at the rear. Supplied with German parts approval The KW V3 Clubsport is supplied with a German parts approval (Teilegutachten). All requirements and instructions specified in the approval document must be observed during installation, adjustment and approval. Product features KW part number 35230865 KW V3 Clubsport coilover suspension KW front top mounts included For 2015–2017 Mustang 6Independently adjustable rebound damping – 16 clicks Independently adjustable low-speed compression damping – 12 clicks Independent rebound and compression adjustment Continuous ride-height adjustment within the approved range Front: threaded coilover struts Rear: separate springs with height adjusters and dampers KW inox-line stainless-steel technology Front axle load up to 1075 kg Rear axle load up to 1150 kg Supplied with German parts approval (Teilegutachten)
The KW V3 coilover suspension 35230065 combines individually adjustable ride height with extensive damper adjustment. Rebound and compression damping can be adjusted independently, allowing the suspension to be fine-tuned to the vehicle, tyres, driving style and intended use. The V3 is particularly suitable for Mustang drivers looking for a sporty and individually adjustable road suspension while retaining a balanced level of everyday usability. Independent rebound and compression adjustment Rebound damping can be adjusted through 16 clicks, allowing the driver to influence body movement, stability and suspension response. Independently of the rebound setting, the KW V3 features 12-click adjustable low-speed compression damping. This provides additional setup flexibility for different tyre characteristics and modified vehicle configurations. The independent rebound and compression adjustment provides considerably greater setup flexibility than a suspension system with fixed damping characteristics. Sporty and balanced base setup The KW V3 is supplied with a vehicle-specific base setup developed by KW. The additional adjustment options are therefore not required simply to operate the suspension, but allow the driver to fine-tune it to personal preferences and other modifications to the vehicle. This makes the V3 suitable for both performance-oriented road Mustangs and vehicles with additional performance modifications where individual suspension tuning is desired. Continuous ride-height adjustment The KW V3 allows individual lowering within its approved adjustment range: Front axle: approx. 30–50 mm Rear axle: approx. 20–40 mm At the front, ride height is adjusted through the threaded struts. At the rear, separate springs with height adjusters and matching dampers are used. KW inox-line The suspension uses KW's proven inox-line stainless-steel technology. The stainless-steel housings, KW trapezoidal threads and polyamide adjustment collars are designed to provide reliable height adjustment and high corrosion resistance over long-term use. Vehicle applications 2015–2017 Ford Mustang 6 Mustang 2.3 EcoBoost Mustang 3.7 V6 Mustang GT 5.0 V8 Coupe and ConvertibleMaximum front axle load: 1075 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1075 kg at the front and 1150 kg at the rear. Supplied with German parts approval The KW V3 is supplied with a German parts approval (Teilegutachten). All requirements and instructions specified in the approval document must be observed during installation, adjustment and approval. Product features KW part number 35230065 KW V3 coilover suspension For 2015–2017 Mustang 6Independently adjustable rebound damping – 16 clicks Independently adjustable low-speed compression damping – 12 clicks Independent rebound and compression adjustment Front lowering approx. 30–50 mm Rear lowering approx. 20–40 mm Height adjustable at front and rear Front: threaded coilover struts Rear: separate springs with height adjusters and dampers KW inox-line stainless-steel technology Front axle load up to 1075 kg Rear axle load up to 1150 kg Supplied with German parts approval (Teilegutachten)
The KW V4 Clubsport coilover suspension 39730265 is the dedicated track-oriented suspension solution for the 2015–2017 Mustang 6. With separately adjustable rebound damping plus independent low- and high-speed compression adjustment, it provides extensive possibilities for tuning the suspension to the vehicle setup, tyres, track conditions and individual driving style. The V4 Clubsport combines motorsport-derived technology with a German parts approval (Teilegutachten, §19.3), making it particularly suitable for Mustangs that are driven on the road as well as regularly used for track days. 3-way adjustable damping The KW V4 Clubsport uses KW 2-valve damper technology and allows three damping characteristics to be adjusted independently: Rebound: 16 clicks Low-speed compression: 6 clicks High-speed compression: 14 clicks This provides considerably greater flexibility when adapting the suspension to different requirements. Vehicle weight, tyres, track characteristics and other vehicle modifications can all be taken into account when developing an individual setup. Low-speed compression adjustment primarily influences the suspension response during relatively slow damper movements, such as those caused by load transfer, braking, acceleration and body movement. High-speed compression adjustment provides additional control over rapid damper movements, such as those encountered over bumps or kerbs. Developed for track days The KW V4 Clubsport is part of the KW Track Performance range and is designed for vehicles that are regularly driven on circuit. KW's base setup can be further adapted through the extensive adjustment options to suit tyres, vehicle weight, driving style and individual track conditions. This suspension is therefore aimed particularly at ambitious drivers who want to optimise their Mustang not only through ride height but also through detailed damper tuning. Front top mounts included This version includes KW top mounts for the front axle as part of the suspension system. The motorsport-oriented top mounts provide more precise wheel control and complement the performance-focused Clubsport concept. Continuous ride-height adjustment Ride height can be individually adjusted within the approved adjustment range: Front axle: approx. 35–55 mm Rear axle: approx. 30–50 mm The front axle uses threaded coilover struts. At the rear, the system consists of separate springs with height adjusters and matching dampers. KW inox-line stainless-steel technology The KW V4 Clubsport uses KW's proven inox-line stainless-steel technology. High-quality components and robust construction are designed to meet the increased demands of performance road and circuit use. Vehicle applications 2015–2017 Ford Mustang 6 Mustang 2.3 EcoBoost Mustang 3.7 V6 Mustang GT 5.0 V8 Coupe and Convertible Maximum front axle load: 1075 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1075 kg at the front and 1150 kg at the rear. Supplied with German parts approval The KW V4 Clubsport is supplied with a German parts approval (Teilegutachten, §19.3). All requirements and instructions specified in the approval document must be observed during installation, adjustment and approval. Scope of delivery and product features KW part number 39730265 KW V4 Clubsport Track Performance coilover suspension KW front top mounts included For 2015–2017 Mustang 6 Adjustable rebound damping – 16 clicks Adjustable low-speed compression – 6 clicks Adjustable high-speed compression – 14 clicks 3-way independently adjustable damping Front lowering approx. 35–55 mm Rear lowering approx. 30–50 mm Height adjustable at front and rear Front: threaded coilover struts incl. top mounts Rear: separate springs with height adjusters and dampers KW inox-line stainless-steel technology Front axle load up to 1075 kg Rear axle load up to 1150 kg Supplied with German parts approval (Teilegutachten, §19.3)