Extras
Choose your category
300 km/h Speedometer Extension for Mustang 6 Facelift – at Schropp
Speedometer display extension up to 300 km/h for Ford Mustang 6 Facelift (type LAE), model years 2018–2023. The modification is carried out directly on the vehicle at our workshop and is available for vehicles with both automatic and manual transmissions. The programming is performed via the OBD interface. There is no need to open or remove the instrument cluster. On-site service at Schropp only: This service is carried out exclusively on the vehicle at our workshop. No shipping and no service for instrument clusters sent to us separately. Product features Speedometer display extension up to 300 km/h For Mustang 6 Facelift, type LAE Model years 2018–2023 For automatic and manual transmissions Programming via the OBD interface No opening of the instrument cluster required No removal of the instrument cluster required Service carried out exclusively at Schropp ACC / cruise control remains fully functional Possible IPC software update Depending on the vehicle's current software version, an additional IPC (Instrument Panel Cluster) software update may be required before the speedometer extension can be performed. If this update is required for your vehicle, an additional charge of EUR 120.00 including VAT applies. Vehicle applications Ford Mustang 6 Facelift (type LAE) Model years 2018–2021 Automatic transmission Manual transmission Please arrange an appointment with us for this service.
Barracuda Adapter for Racing Lug Nuts & Wheel Bolts
Suitable adapter for installing and removing Barracuda Racing Lug Nuts and Racing Bolts. The adapter fits, among others, the Barracuda Racing Lug Nuts for Ford Mustang offered in our shop as well as corresponding Barracuda Racing Bolts for other vehicles. It can also be used with the corresponding wheel bolts and lug nuts supplied with wheels from Barracuda Racing Wheels and Corspeed Sports Wheels. Depending on the wheel bolt or lug nut system used, the adapter may also be suitable for wheels from other manufacturers. In this case, please compare the design of your existing adapter or fastening system before ordering. Please note: The design and length of the supplied adapter may vary depending on the current version supplied by Barracuda. The product image is therefore for reference only.
German Approval Document for Roush Cold Air Intake – Mustang GT 2018–2023
Vehicle-specific approval document for the Roush Cold Air Intake / performance air filter for European-specification Ford Mustang 6 Facelift GT models from model years 2018–2023. The document is intended as the basis for a German modification approval according to § 19(2) / § 21 StVZO by an appropriately authorised inspection engineer. VIN required: The document is individually prepared for the specific vehicle. Please enter the complete Vehicle Identification Number (VIN) of your Mustang in the order comments. Vehicle applications Ford Mustang 6 Facelift GT 5.0 V8 European-specification vehicle Model years 2018–2023 Roush Cold Air Intake / performance air filter Individually issued document The approval document is individually prepared and printed using the Vehicle Identification Number provided with the order. Please check the VIN carefully before completing your order. Right of withdrawal: As this document is individually produced according to customer specifications using the supplied VIN, the statutory right of withdrawal does not apply in accordance with § 312g (2) No. 1 of the German Civil Code (BGB). Please note: This product includes the approval document only. The Roush Cold Air Intake / performance air filter and the vehicle inspection itself are not included.
K&N Performance Air Intake for Mustang 7 GT & Dark Horse – Garage Sale
Garage Sale – clearance item: This product will not be restocked. Available only while current stock lasts. The K&N performance air intake for the Ford Mustang 7 is suitable for Mustang GT and Dark Horse models from model year 2024. The system replaces the factory air filter setup and is designed for use without requiring an additional software calibration. Product features For Ford Mustang 7 from model year 2024 Suitable for Mustang GT and Dark Horse K&N performance air intake system No software calibration required No road approval / homologation Garage Sale – will not be restocked Approval notice: This product does not have road approval or an approval document for use on public roads.
Modification of Existing Schropp SCT Tune File for Vehicle Upgrades
This service is exclusively for customers who already have a Schropp tune file and an SCT flashing device supplied by us. Have you made further modifications to your vehicle since your Schropp tune file was created? With this service, we can modify your existing Schropp SCT tune file to accommodate suitable subsequent vehicle upgrades. Before ordering: Please contact us by email with details of the modifications you have made or are planning. We will confirm in advance whether the required tune file modification can be covered by this service. Examples of suitable modifications This service may be suitable for changes such as: different air filter or modified intake components different throttle body transmission calibration changes similar modifications requiring changes to the existing tune file The exact changes required will depend on the vehicle, the existing tune file and the modifications made to the vehicle. Not suitable for major vehicle conversions This service does not cover fundamental changes to the engine configuration or major performance conversions, such as the installation of a supercharger or comparable modifications. Major conversions require a more extensive calibration and must be discussed with us individually. Requirements Existing Schropp tune file SCT flashing device used with the existing Schropp tune Vehicle modifications communicated to us by email before ordering Confirmation from us that the requested changes can be covered by this service This product covers the modification of an existing Schropp SCT tune file. It is not a service for creating an initial tune file or for a complete recalibration following major vehicle modifications.
New Tune File after Ford Software Update – for Existing Schropp SCT Customers
This service is exclusively for customers who already have a Schropp tune file and an SCT flashing device supplied by us. A Ford software update may change the software version or strategy of the vehicle's engine control unit. If this happens, the existing Schropp tune file has to be adapted to the new software version and a new tune file created. Important before the Ford software update: The vehicle must first be flashed back to its original factory calibration using the SCT device (Return to Stock). The Ford software update should only be carried out afterwards. Why is there a charge for this service? For many years, we generally provided the creation or adaptation of a tune file following a Ford software update without an additional charge. However, the frequency of these updates and the number of affected vehicles have increased considerably. Creating a new tune file that is compatible with the updated vehicle software requires additional work and verification. For this reason, we can no longer provide this service free of charge. Information we need from you After the Ford software update, please use your SCT device to retrieve the current Vehicle Information and send us the following: Vehicle VIN Serial number of the SCT device Current Strategy / Vehicle Information after the Ford software update If an additional stock file is required Depending on the changes made to the vehicle software, we may also need the vehicle's current factory calibration. In this case, a Stock Upload must be performed on the SCT device under Device Settings. The file can then be retrieved from the device using the SCT Device Updater and the Get Stock File from Device function and sent to us. We can then use this file to create the new tune file for the updated vehicle software. Please note: If an additional stock upload is required, the processing time will be longer. Requirements Existing Schropp tune file SCT flashing device previously used for the Schropp tune Vehicle returned to the stock calibration before the Ford software update Current Vehicle Information / Strategy after the update This product covers only the creation of a new tune file following a change to the Ford vehicle software. It is not a tuning service for vehicles that do not already have a Schropp tune file.
Schropp Gift Voucher – €100
Give the gift of choice with a €100 Schropp Fahrzeugtechnik gift voucher. The voucher can be redeemed in our online shop or directly at Schropp Fahrzeugtechnik – for example for tuning parts, accessories or Schropp Fahrzeugtechnik services. Gift voucher Voucher value: €100 Redeemable in our online shop or directly at Schropp Fahrzeugtechnik Individual voucher code Printed gift voucher – delivered by post No cash redemption The voucher value cannot be redeemed for cash.
Schropp Gift Voucher – €150
Give the gift of choice with a €150 Schropp Fahrzeugtechnik gift voucher. The voucher can be redeemed in our online shop or directly at Schropp Fahrzeugtechnik – for example for tuning parts, accessories or Schropp Fahrzeugtechnik services. Gift voucher Voucher value: €150 Redeemable in our online shop or directly at Schropp Fahrzeugtechnik Individual voucher code Printed gift voucher – delivered by post No cash redemption The voucher value cannot be redeemed for cash.
Schropp Gift Voucher – €200
Give the gift of choice with a €200 Schropp Fahrzeugtechnik gift voucher. The voucher can be redeemed in our online shop or directly at Schropp Fahrzeugtechnik – for example for tuning parts, accessories or Schropp Fahrzeugtechnik services. Gift voucher Voucher value: €200 Redeemable in our online shop or directly at Schropp Fahrzeugtechnik Individual voucher code Printed gift voucher – delivered by post No cash redemption The voucher value cannot be redeemed for cash.
Schropp Gift Voucher – €50
Give the gift of choice with a €50 Schropp Fahrzeugtechnik gift voucher. The voucher can be redeemed in our online shop or directly at Schropp Fahrzeugtechnik – for example for tuning parts, accessories or Schropp Fahrzeugtechnik services. Gift voucher Voucher value: €50 Redeemable in our online shop or directly at Schropp Fahrzeugtechnik Individual voucher code Printed gift voucher – delivered by post No cash redemption The voucher value cannot be redeemed for cash.
SCT Tuning File – Additional Calibration for Special Options & Hardware Modifications
Important: This product is not a standalone tuning file. It can only be purchased as an additional service together with a tuning file or flasher including a tuning file ordered at the same time. Certain vehicle modifications and individual requirements involve additional calibration work when creating an SCT tuning file. This additional service covers extended calibration requirements in combination with the corresponding tuning file. Examples of additional calibration work Burble function, for example similar to the Mustang LAE Bullitt, for 2018–2023 Mustang GT Calibration for modified camshafts Calibration for a modified intake manifold Other comparable special options and hardware modifications subject to prior consultation Ordering Please order this product together with the appropriate tuning file or flasher including a tuning file. As the required calibration work depends on the individual vehicle configuration, we recommend contacting us in advance for other or unusual modifications. Special item: This product is offered as an additional service for extended calibration work.
SCT X4 Unlock Service for 7015
Unlock service for the SCT X4 flashing device with part number 7015. When an SCT X4 is used with a vehicle, the device becomes linked to that vehicle – a status commonly referred to by SCT as “married”. While the device remains married to the previous vehicle, it cannot be used with another vehicle. This is particularly relevant when purchasing a used SCT X4 that was sold without first being properly returned to an unlocked state. With our SCT X4 Unlock Service, the device status is reset to “unmarried”. The SCT X4 can then be paired with and used on a new vehicle. Required when ordering: Please enter the serial number of your SCT X4 in the order comments. Product features Unlock service for SCT X4 Resets the device status from “married” to “unmarried” Allows the device to subsequently be used with a new vehicle Ideal, for example, for used SCT X4 devices still married to the previous vehicle Exclusively for SCT part number 7015 Device serial number required Not compatible with SCT X4 7015INT Important: This unlock service does not work with the international SCT X4 version with part number 7015INT.