Brakes

MOV’IT high-performance front brake system for the Ford Mustang 2005–2014. The MOV’IT steel brake system combines powerful braking performance with high-quality components specifically engineered to work together. At its heart are MOV’IT 6s5 6-piston aluminium brake calipers combined with two-piece, double-ventilated 370x35 mm steel brake discs. The system is designed for drivers looking for a higher-performance brake system with increased thermal capacity and precise modulation compared with the factory brakes – for sporty road use as well as vehicles subjected to higher braking loads. MOV’IT 6-piston brake system MOV’IT 6s5 6-piston aluminium brake calipers 370x35 mm MOV’IT steel brake discs two-piece brake disc construction double-ventilated brake discs MOV’IT Comfort BE-6s1 brake pads vehicle-specific brake caliper adapters braided brake lines for front and rear axles 370x35 mm two-piece steel brake discs The two-piece MOV’IT steel brake discs measure 370 mm in diameter and 35 mm in thickness and provide significantly greater thermal capacity than the factory brake system. Double ventilation supports heat dissipation under high braking loads. Combined with the 6-piston calipers, the components form a matched braking system designed to provide consistent and controllable braking performance. Scope of delivery 2x MOV’IT 6s5 6-piston brake caliper – left and right 2x MOV’IT 370x35 mm double-ventilated steel brake disc – left and right 2x vehicle-specific brake caliper adapter 1x set of MOV’IT Comfort BE-6s1 brake pads 1x set of Teflon-coated braided brake lines for front and rear axles installation hardware installation instructions bedding-in instructions Teilegutachten or comparative approval documentation depending on the respective vehicle specification Check wheel clearance Minimum 18-inch wheels required. Wheel diameter alone does not automatically guarantee sufficient clearance for the brake system. Wheel design, offset and the internal profile of the wheel all affect the available space. If in doubt, please contact us before ordering so that wheel clearance can be checked. Suitable for Ford Mustang 2005–2014 front axle 18-inch wheels or larger with sufficient brake clearance Ordering information MOV’IT brake systems are ordered and manufactured according to the respective vehicle configuration. Please make sure that complete and accurate vehicle information is provided when ordering.

MOV’IT high-performance front brake system for the Ford Mustang 2005–2014. The large MOV’IT steel brake system combines 6s1 6-piston billet aluminium brake calipers with two-piece, double-ventilated 396x36 mm steel brake discs. It provides a powerful braking solution for high-performance and sport-driven Mustangs. With its large 396 mm brake discs, the system provides high thermal capacity and is designed for drivers who require consistent, precisely controllable braking performance even under high loads. MOV’IT 6-piston brake system MOV’IT 6s1 6-piston billet aluminium brake calipers 396x36 mm MOV’IT steel brake discs two-piece brake disc construction double-ventilated brake discs MOV’IT Comfort BE-6s1 brake pads vehicle-specific brake caliper adapters braided brake lines for front and rear axles Teilegutachten 396x36 mm two-piece steel brake discs The two-piece MOV’IT steel brake discs measure 396 mm in diameter and 36 mm in thickness and provide high thermal capacity. Double ventilation supports heat dissipation during repeated heavy braking and under high loads. Combined with the rigid 6s1 billet calipers and matched MOV’IT brake pads, the components form a powerful braking package with precise modulation. Scope of delivery 2x MOV’IT 6s1 6-piston billet brake caliper – left and right 2x MOV’IT 396x36 mm double-ventilated steel brake disc – left and right 2x vehicle-specific brake caliper adapter 1x set of MOV’IT Comfort BE-6s1 brake pads 1x set of Teflon-coated braided brake lines for front and rear axles installation hardware installation instructions bedding-in instructions Teilegutachten Check wheel clearance The brake system generally requires at least 20-inch wheels. A known exception is the original 19-inch GT500 SVT Track Pack wheel, which also provides sufficient clearance for this brake system. With other wheels, diameter alone does not automatically guarantee sufficient clearance. Wheel design, offset and internal profile determine the available space around the brake caliper and disc. If you are using different wheels, please contact us before ordering if there is any doubt about clearance. Suitable for Ford Mustang 2005–2014 front axle 20-inch aftermarket wheels with sufficient brake clearance original 19-inch GT500 SVT Track Pack wheels Ordering information MOV’IT brake systems are ordered and manufactured according to the respective vehicle configuration. Please make sure that complete and accurate vehicle information is provided when ordering.