Mustang 7 2024-
Discover our tuning range for the Ford Mustang 7 from model year 2024. From suspension and performance to styling and accessories, you'll find selected products for your Mustang here.
Choose your category
Barracuda Karizzma 20” Wheel Set for Mustang 5, 6 & 7 – Mattblack Puresports
The Barracuda Karizzma is a distinctive 20-inch wheel with a sporty design. In this combination selected by Schropp, it is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. We have been fitting the Karizzma to Mustangs in exactly this combination for years: 9x20 ET40 on the front axle and 10.5x20 ET40 on the rear axle. This gives the Mustang a noticeably more substantial wheel and tyre appearance with a wider rear setup, using a combination that is well proven on our Mustang builds. Wheel set Front axle: 2x Barracuda Karizzma – 9x20 – ET40 Rear axle: 2x Barracuda Karizzma – 10.5x20 – ET40 Bolt pattern: 5x114.3 Finish: Mattblack Puresports Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 All models within the respective Mustang generations Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Karizzma wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Racing Lug Nuts M14x1.5 – Set of 20, 74 mm
The Barracuda Racing Lug Nuts combine distinctive racing-inspired styling with a high-quality two-piece construction. The set contains 20 M14x1.5 conical-seat lug nuts and is suitable for Mustang 6 and Mustang 7 models when used with compatible alloy wheels. The 74 mm Racing Lug Nuts are available in a range of colours, allowing the appearance to be matched individually to the wheels and vehicle. Aluminium styling combined with high-strength steel The visible heads are manufactured from high-quality anodised aluminium, while the load-bearing components are made from high-strength grade 10.9 steel. This construction combines the characteristic Barracuda Racing appearance with a robust technical basis for road use. Suitable for many alloy wheels Barracuda Racing Lug Nuts can be used with many compatible alloy wheels regardless of wheel manufacturer, provided that the wheel has the correct conical seat and sufficient clearance. A minimum wheel bolt hole diameter of 25 mm is required. When installed, the Racing Lug Nuts must not protrude beyond the outer edge of the wheel. Compatibility therefore always depends on the individual wheel design, seat and available clearance. Special adapter and additional theft protection The lug nuts are installed and removed using the special Barracuda wheel adapter. The dedicated tool design also provides additional protection against simply removing the wheels with conventional tools. Product features Set of 20 Barracuda Racing Lug Nuts Thread: M14x1.5 Conical seat Length: 74 mm Suitable for Mustang 6 and Mustang 7 with compatible wheels Suitable for many alloy wheels from different manufacturers Minimum 25 mm wheel bolt hole diameter required Anodised aluminium heads High-strength grade 10.9 steel components Available in various colours Special adapter for installation and removal Approved for road vehicles without additional registration – confirmation supplied with the product Vehicle applications Mustang 6 pre-facelift 2015–2017 Mustang 6 Facelift 2018–2023 Mustang 7 from model year 2024 Important: Compatibility depends on the wheel being used. Thread size, conical seat, wheel bolt hole diameter and available clearance must be checked before installation. The Racing Lug Nuts must not protrude beyond the outer edge of the wheel. Wheel stud length: The existing wheel stud length must be checked before installation. Depending on the vehicle and wheel combination, the studs may be too long and may need to be professionally shortened. Note: Example images. The actual colour may vary slightly depending on the selected version and display.
Barracuda Ultralight Dragoon 20” Wheel Set for Mustang 6 & 7 – Bronze
Limited availability: The Barracuda Ultralight Dragoon is being discontinued by Barracuda and is now available only in limited quantities. Continued availability therefore cannot be guaranteed. The Barracuda Ultralight Dragoon combines a distinctive sporting design with an eye-catching bronze finish. In our Mustang setup, the Dragoon is fitted in 10x20 ET40 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using the same wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET40 setup is a combination selected and proven by us for the Mustang. Wheel set Front axle: 2x Barracuda Ultralight Dragoon – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Dragoon – 10x20 – ET40 Bolt pattern: 5x114.3 Finish: Bronze Supplied with German TÜV parts certificate (Teilegutachten) for Ford Mustang type LAE Vehicle applications Ford Mustang 6 – from model year 2015 Ford Mustang 7 – from model year 2024 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Dragoon wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten) for Ford Mustang type LAE. The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 2 20” Wheel Set for Mustang 5, 6 & 7
The Barracuda Ultralight Project 2 combines a sporty multi-spoke design with a low wheel weight. In our Mustang setup, it is fitted in 9x20 ET40 on the front axle and 10.5x20 ET40 on the rear axle and is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. We offer the Project 2 in two finishes: Silver Brushed and Gunmetal. The desired finish can be selected when ordering. The 9x20 front and 10.5x20 rear setup is a combination selected and proven by us for the Mustang. 5 mm wheel spacers are part of this setup on the front axle and are already included with the wheel set. Wheel set Front axle: 2x Barracuda Ultralight Project 2 – 9x20 – ET40 Front wheel weight: 11.8 kg per wheel Rear axle: 2x Barracuda Ultralight Project 2 – 10.5x20 – ET40 Rear wheel weight: 12.2 kg per wheel Bolt pattern: 5x114.3 Finishes: Silver Brushed or Gunmetal 5 mm front axle wheel spacers included Supplied with German TÜV parts certificate (Teilegutachten) Product image note: The vehicle images show the Barracuda Ultralight Project 2 in Gunmetal. Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 All models within the respective Mustang generations Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 2 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 3.0 20” Wheel Set for Mustang – Flash Colours
The Barracuda Ultralight Project 3.0 is anything but an ordinary black wheel. Its gloss black finish is combined with machined spoke contours in striking Flash colours. Especially in direct sunlight, the coloured details create an eye-catching effect that emphasises the wheel design. In our Mustang setup, the Project 3.0 is fitted in 10x20 ET40 on all four corners, creating a sporty and balanced wheel and tyre appearance with identical wheel dimensions on the front and rear axles. Wheel set Front axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Bolt pattern: 5x114.3 Weight: 12.6 kg per wheel Base finish: Gloss Black Machined spoke contours in the selected Flash colour Supplied with German TÜV parts certificate (Teilegutachten) Flash colours Flash Red Flash Blue Flash Gold Flash Green Flash Copper Flash Orange The intensity of the machined coloured contours changes depending on the light. In direct sunlight in particular, the Flash colours become a real highlight. Vehicle applications Ford Mustang 6 Ford Mustang 7 Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 3.0 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 3.0 20” Wheel Set for Mustang 6 & 7 – Matt Black
The Barracuda Ultralight Project 3.0 combines a sporty multi-spoke design with a distinctive matt black finish and machined spoke contours. In our Mustang setup, it is fitted in 10x20 ET40 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using identical wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET40 setup is a combination selected and proven by us for the Mustang. Wheel set Front axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Bolt pattern: 5x114.3 Weight: 12.6 kg per wheel Finish: Matt Black with machined spoke contours Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 6 Ford Mustang 7 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 3.0 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
BMR Driveshaft Safety Loop DSL017 for Mustang 2011–2026 – Black Hammertone
The BMR DSL017 Driveshaft Safety Loop is a heavy-duty safety restraint for the Ford Mustang driveshaft. Installed around the front section of the driveshaft, it is designed to help contain the driveshaft in this area underneath the vehicle in the event of a failure. The Safety Loop does not alter the operation of the driveshaft and is not a suspension or performance modification. Its purpose is to provide an additional level of protection in the event that a driveshaft or its connection fails under high load. What does a Driveshaft Safety Loop do? At high vehicle speeds, the driveshaft rotates at correspondingly high speed. In the unlikely event that it becomes disconnected or fails while driving, an uncontrolled driveshaft underneath the vehicle can potentially cause significant secondary damage. The BMR Safety Loop surrounds the front section of the driveshaft. In the event of a failure, it is designed to help contain the driveshaft in this area underneath the vehicle and thereby reduce the risk of additional damage. Additional protection at high speeds For a Mustang that is regularly driven at high speeds, a Driveshaft Safety Loop can provide a useful additional mechanical safeguard. On 2015 and later Mustang models, the factory driveshafts are already designed for the higher vehicle speeds these models can achieve. The Safety Loop is therefore not a prerequisite for higher-speed driving on these vehicles, but it can be installed as an additional mechanical safety measure. Particularly relevant for 2011–2014 Mustangs On 2011–2014 Mustang models, this becomes particularly relevant when the factory speed limiter is removed. Especially on V6 models, it should be taken into account that the factory driveshaft was not designed for unrestricted increases in vehicle speed. A Safety Loop does not make an unsuitable driveshaft safe for higher speeds and does not replace any necessary driveshaft upgrade. It does, however, provide an additional safeguard for the worst-case scenario if the driveshaft or one of its connections should fail. Heavy-duty bolt-on construction The DSL017 is manufactured from 0.25-inch laser-cut steel plate and attaches to the factory transmission crossmember. Its fully bolt-on design requires no welding. High-strength Grade 8 mounting hardware is included. BMR specifies an installation time of approximately one hour. Vehicle applications 2011–2014 Ford Mustang 2015–2023 Ford Mustang 2024 and later Ford Mustang Suitable for various engines and model variants Compatible with MGW shifters Product features BMR part number DSL017 Additional driveshaft safety restraint Can help reduce the risk of secondary damage in the event of a driveshaft failure 0.25-inch laser-cut steel construction Black Hammertone finish Attaches to the factory transmission crossmember 100% bolt-on installation Grade 8 mounting hardware included No welding required Made in the USA
Corspeed DeVille 21” Wheel Set for Mustang 5, 6 & 7 - Gunmetal
The Corspeed DeVille combines a distinctive sporting design with the striking appearance of a 21-inch wheel. In our Mustang setup, it is fitted in 9x21 ET40 on the front axle and 10.5x21 ET40 on the rear axle and is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. The wider rear wheels emphasise the powerful proportions of the Mustang, while the 9x21 front wheels create a balanced and sporty overall appearance. This is a combination selected and proven by us for the Mustang. The Corspeed DeVille is available from us in Matt Gunmetal. Wheel set Front axle: 2x Corspeed DeVille – 9x21 – ET40 Rear axle: 2x Corspeed DeVille – 10.5x21 – ET40 Bolt pattern: 5x114.3 Finish: Matt Gunmetal Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your 21-inch Corspeed DeVille wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Corspeed Kharma 20” Wheel Set for Mustang 6 & 7 - Silver
The Corspeed Kharma combines a distinctive sporting design with wheel dimensions particularly well suited to the Mustang. In our setup, it is fitted in 10x20 ET35 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using identical wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET35 setup is a combination selected and proven by us for the Mustang. The Corspeed Kharma is available from us in Silver Brushed. Wheel set Front axle: 2x Corspeed Kharma – 10x20 – ET35 Rear axle: 2x Corspeed Kharma – 10x20 – ET35 Bolt pattern: 5x114.3 Finish: Silver Brushed Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 6 Ford Mustang 7 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Corspeed Kharma wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Eibach 18mm Black Wheel Spacers incl. Black Shank Nuts / Set per Axle
Eibach Pro-Spacer System 6 wheel spacers in black. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
Eibach 18mm Silver Wheel Spacers incl. Black Shank Nuts / Set per Axle
Eibach Pro-Spacer System 6 wheel spacers in silver. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
Eibach Anti-Roll Kit Sway Bars for Mustang 6 + Mustang 7
For us, the Eibach Anti-Roll Kit is one of the most effective suspension upgrades available for the Mustang. The uprated anti-roll bars reduce body roll and give the car a more precise and controlled feel, particularly through fast corners and quick changes of direction – without having to replace the complete suspension. This is not a product we only know from a catalogue. At Schropp, we have installed these Eibach anti-roll bars on numerous Mustangs and use them on our own cars as well. They can be found on our SF600R, our Mustang Gen 7 and even on the OVR Racing Mustang built for the Nürburgring 24-hour race. From road cars to serious track use, this wide range of applications is one of the reasons why we rate this setup so highly. Less body roll, more precise handling During fast cornering, wheel load is transferred between the inside and outside of the car. The stiffer Eibach anti-roll bars counteract the resulting body roll, helping the Mustang feel more stable during changes of direction and respond more precisely to steering inputs. The kit consists of a 35 mm tubular front anti-roll bar and a 24.5 mm tubular rear anti-roll bar. Both bars are 3-way adjustable, allowing their effect to be matched to the vehicle setup, tyres and individual driving style. 3-way adjustable The different mounting positions allow the effective stiffness of the anti-roll bars to be changed. This also makes it possible to influence the handling balance between the front and rear axle. Depending on the chosen settings, the car can be tuned towards a more neutral balance or its tendency towards understeer or oversteer can be altered. For a good starting point, we recommend a balanced base setting. Any further adjustment should always take the complete vehicle setup, tyres and intended use into account. Product features Eibach Anti-Roll Kit for front and rear axle Front: 35 mm tubular anti-roll bar, 3-way adjustable Rear: 24.5 mm tubular anti-roll bar, 3-way adjustable Reduces body roll during cornering More direct and precise handling through corners and quick direction changes Adjustable front and rear bars allow the handling balance to be fine-tuned Suitable for performance-oriented road and track-focused vehicle setups Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Mustang 7 from model year 2024: 5.0 GT and Dark Horse Mustang 6 Facelift from model year 2018: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 6 pre-facelift 2015–2017: 2.3 EcoBoost, 5.0 GT and 3.7 V6
Ford Racing High-Flow Water Pump for Mustang 5.0 / 5.2
The Ford Racing M-8501-M52A High-Flow Water Pump is a useful upgrade for performance-driven Mustangs equipped with the 5.0L Coyote or 5.2L engine. Compared with the standard water pump, it provides up to 30% increased coolant flow, helping the cooling system cope with increased thermal loads. Reliable engine cooling becomes particularly important during prolonged high-load driving on the race track or spirited mountain-pass driving. This makes the upgraded water pump a worthwhile addition not only for modified Mustangs, but also for cars that regularly see demanding performance use. Race-track tested by Schropp We use this water pump ourselves in our 2003 Mustang track car with a Gen 2 Coyote swap. The improved cooling has proven itself during our own race-track use, including sessions at the Hockenheimring. For further optimisation of the cooling system, we recommend combining the pump with the Reische Performance Thermostat, part no. SW10433. Ford Racing performance version The M-8501-M52A uses OEM components selected by Ford Racing with tight allowable manufacturing tolerances. The kit includes the water pump, matching 3-bolt water pump pulley and the water-pump-to-block mounting bolts. The water pump hub is positioned at the same height as the standard 5.0L Coyote and naturally aspirated 5.2L applications. Also suitable for Mustang 7 Ford Racing officially lists the M-8501-M52A for 2011–2021 5.0L Coyote and 2015–2020 5.2L engines. However, the standard Ford BR3Z-8501-S water pump and corresponding BR3Z-8509-HA 3-bolt pulley continue to be used on the Mustang 7 with the Gen 4 5.0L Coyote. The basic factory water-pump configuration has therefore been carried over to the S650 generation. Note: Application to later 5.0L models, including Mustang 7, is based on the continued use of the corresponding factory water-pump and pulley configuration. Ford Racing's official application list for the M-8501-M52A has not yet been extended accordingly. Product features Up to 30% increased coolant flow compared with the standard pump Ford Racing performance water pump OEM components with tight allowable manufacturing tolerances 3-bolt water pump pulley included Water-pump-to-block mounting bolts included Factory hub height for 5.0L Coyote / naturally aspirated 5.2L applications Ideal for performance-driven and modified vehicles Used by Schropp in our own Coyote-swap track car Vehicle applications Mustang 5.0 GT 2011–2025 Mustang Bullitt 5.0 2019–2020 Mustang Mach 1 5.0 2021–2023 Mustang Dark Horse 5.0 2024–2025 Shelby GT350 / GT350R 5.2 2015–2020 Coyote swap applications using the corresponding water-pump and pulley configuration Ford Racing part number: M-8501-M52A
FTBR Differential Cooler Kit for Mustang GT 2015–2026
The Full Tilt Boogie Racing FT 570 Differential Cooler Kit is a complete active cooling system for the Mustang GT rear differential. It is designed for vehicles that experience significantly increased differential oil temperatures during race-track use or other sustained high-load driving conditions. The system combines a high-performance oil-to-air cooler with its own electric fan and a self-priming Tilton oil pump. Differential oil is actively circulated through the dedicated cooling circuit before being returned to the differential. The FTBR FT 570 is suitable for Mustang GT Coupé models of both the Mustang 6 and Mustang 7 generations. It is not suitable for Convertible models. Important when ordering: with or without OEM temperature sensor The kit is available in two configurations for vehicles with or without the factory differential temperature sensor. When ordering, please state in the order comments during checkout whether your Mustang is equipped with an OEM differential temperature sensor. Where fitted, the factory differential temperature sensor is located on the differential cover directly below the fill plug. Active cooling for demanding applications Differential oil temperatures can increase considerably during sustained high-load driving. Particularly for vehicles regularly used on the race track, controlling differential temperature is therefore an important part of maintaining a durable drivetrain. The FTBR differential cooler operates as a dedicated cooling circuit. A lightweight, self-priming Tilton pump circulates the differential oil through a high-performance plate-and-fin oil cooler. An electric curved-blade fan provides additional airflow through the cooler. Adjustable pump and fan control The kit includes an adjustable controller with wiring harness for operation of the pump and fan. The FT 570 is therefore more than an individual oil cooler: it is a complete system incorporating the cooling, plumbing and control components required for installation. Complete kit with prepared differential cover FTBR supplies a new differential cover with the required AN fittings and sensor ports pre-installed. The AN fittings are also pre-assembled onto the flexible premium black nylon race hose. Billet aluminium mounting brackets for the cooler and the required mounting and electrical hardware are also included. Kit contents High-performance plate-and-fin oil cooler Curved-blade electric fan, approx. 500 cfm Lightweight self-priming Tilton differential oil cooler pump Adjustable pump and fan controller with wiring harness New differential cover with pre-installed AN fittings and sensor ports Flexible premium black nylon race hose AN fittings pre-assembled on the hoses Billet aluminium oil cooler mounting brackets Required mounting and electrical hardware Inverted Torx socket for the OEM differential cover bolts Vehicle applications Mustang 6 GT Coupé 2015–2023 Mustang 7 GT Coupé from 2024 Available for vehicles equipped with the OEM differential temperature sensor Available for vehicles without the OEM differential temperature sensor Not suitable for Mustang Convertible models. Ordering information: Please state in the order comments during checkout whether your vehicle is equipped with or without the OEM differential temperature sensor. Full Tilt Boogie Racing part number: FT 570
Genuine Ford Black 5.0 Fender Emblems for Mustang 7 GT – Pair
Genuine Ford black 5.0 Fender Emblems for the Mustang 7 GT. The pair replaces the standard 5.0 emblems on the left and right sides of the vehicle, creating a considerably more subtle and darker appearance. The black 5.0 emblems are part of the genuine Ford Nite Pony appearance and are ideal for adding this OEM styling detail to a Mustang GT that was not originally equipped with the package. Genuine Ford components These are genuine Ford components, not repainted standard emblems or aftermarket reproductions. Their shape, dimensions and appearance correspond to the original Ford design. Combined with the black front grille Pony and black GT decklid emblem, they can be used to create the complete dark emblem appearance of the Mustang 7 Nite Pony package. Product features Genuine Ford 5.0 emblems Black finish For left and right fenders Genuine Ford Nite Pony appearance OEM fit and appearance Suitable for Mustang 7 GT 5.0 V8 Supplied as a pair Scope of delivery 1x left 5.0 fender emblem – Black 1x right 5.0 fender emblem – Black Vehicle applications Mustang 7 GT 5.0 V8 from model year 2024
Genuine Ford Black GT Decklid Emblem for Mustang 7
Genuine Ford black GT Emblem for the rear decklid panel of the Mustang 7 GT. The black emblem replaces the standard version and gives the rear of the Mustang a darker and more performance-oriented appearance. The black GT emblem is part of the genuine Ford Nite Pony appearance and is ideal for upgrading Mustang GT models that were not originally equipped with the package. Genuine Ford component This GT emblem is a genuine Ford component, not a repainted or aftermarket reproduction. It therefore retains the original shape and OEM appearance of the Mustang 7. Combined with the black front grille Pony and black 5.0 fender emblems, it can be used to recreate the complete dark emblem appearance of the Nite Pony package. Product features Genuine Ford GT emblem For the Mustang 7 GT rear decklid panel Black finish Genuine Ford Nite Pony appearance Subtle performance-oriented styling upgrade OEM fit and appearance Vehicle applications Mustang 7 GT from model year 2024
Genuine Ford Black Pony Grille Emblem for Mustang 7
Genuine Ford Mustang Pony Emblem in black for the front grille of the Mustang 7. Ideal for replacing the standard bright-finish Pony with a more subtle and performance-oriented black appearance. The black Pony is part of the genuine Ford Nite Pony appearance and allows Mustang owners without the factory package to add this distinctive styling detail to their car. Genuine Ford component This is not an aftermarket badge or reproduction. It is a genuine Ford component in a black finish, retaining the original Mustang Pony design and OEM appearance. Product features Genuine Ford Mustang emblem Pony emblem for the front grille Black finish Genuine Ford Nite Pony appearance Sporty alternative to the standard emblem OEM fit and appearance Vehicle applications Mustang 7 from model year 2024
Genuine Ford Racing Dark Horse Performance Pack Rear Spoiler for Mustang 7 – Installation & Approval Included
The genuine Ford Racing Performance Pack Rear Spoiler brings the distinctive rear appearance of the Mustang Dark Horse Performance Pack to the Mustang 7. This is a genuine Ford component supplied ready to install in a gloss black finish. The rear spoiler was designed by Ford not only for its appearance but also for aerodynamic function, generating additional downforce at the rear of the vehicle. Genuine Ford Dark Horse Performance Pack component This rear spoiler is original equipment on the Mustang Dark Horse Performance Pack and is also suitable for other Mustang 7 Fastback models from model year 2024. It is therefore an ideal upgrade for Mustang owners looking for a genuine Ford component that combines a more performance-oriented appearance with aerodynamic function. Professional installation and German approval included We offer this rear spoiler exclusively with professional installation and modification approval at our workshop. The spoiler is securely bolted to the boot lid. Depending on the vehicle's original spoiler configuration, appropriate mounting holes may be required for correct installation. Following installation, the spoiler undergoes a modification inspection by TÜV, DEKRA or GTÜ at our premises. This means you receive the complete package from Schropp: the genuine Ford component, professional installation and the required German approval. Gurney Flap included – not covered by our approval The genuine Ford Racing kit also includes the matching Gurney Flap. However, the Gurney Flap is not covered by our modification approval and is therefore not installed by us. The Gurney Flap is supplied to the customer together with the vehicle. Any subsequent installation is carried out solely at the vehicle owner's own responsibility. The modification approval provided by us applies to the rear spoiler without the Gurney Flap installed. Product features Genuine Ford Racing component M-16600-S65PPG Original equipment on Mustang Dark Horse Performance Pack models Sporty OEM appearance for the Mustang 7 Aerodynamically functional rear spoiler Generates additional downforce Pre-painted in gloss black Genuine mounting hardware included Gurney Flap included in the Ford kit Gurney Flap is not covered by our approval and is not installed by us Professional installation at Schropp included German modification inspection by TÜV / DEKRA / GTÜ at our premises included Vehicle applications Mustang 7 Fastback from model year 2024 Mustang GT Mustang Dark Horse Not suitable for Mustang Convertible models. Important: This product is offered exclusively with professional installation and modification approval at Schropp Fahrzeugtechnik. Shipping for customer installation is not available.
KW V1 Coilover Kit for Mustang 6 FL + Mustang 7 with MagneRide
The KW V1 coilover kit combines individually adjustable lowering with a sporty and balanced suspension setup. This version is designed for Ford Mustang models equipped with electronic damper control (MagneRide) and includes the KW cancellation kit for the factory electronic damper control system. The damping characteristics of the KW V1 are factory pre-configured specifically for the vehicle. Springs and dampers are matched to provide a balanced combination of sportier handling and everyday usability. Body roll and pitching movements are reduced, resulting in more direct and responsive handling. Continuously adjustable lowering The threaded adjustment allows the vehicle height to be individually set within the approved adjustment range. KW inox-line stainless-steel technology and the dirt-resistant threaded adjustment system provide durable and reliable height adjustment. For vehicles with MagneRide When replacing the factory electronically controlled suspension, the original electronic damper control is no longer used. The included KW cancellation kit is designed for this application and is used to deactivate the electronic damper control system. Product features KW V1 coilover kit from the inox-line range for Mustang models with electronic damper control / MagneRide includes KW cancellation kit for the electronic damper control system vehicle-specific factory pre-configured damping characteristics sporty and balanced suspension setup individually height adjustable corrosion-resistant stainless-steel technology ready-to-install suspension solution supplied with German parts approval (Teilegutachten) Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models equipped with MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: yes KW MagneRide cancellation kit: included The factory electronic damper control is deactivated during installation. The required KW cancellation kit is already included with the suspension. Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.
KW V1 Coilovers for Mustang 6 FL + Mustang 7
The KW V1 coilover suspension inox-line is an ideal choice for your 2018–2026 Ford Mustang without electronic damper control if you want to combine improved handling with individually adjustable lowering. Its vehicle-specific, factory-configured damper setup provides a well-balanced combination of direct handling, sporty performance and everyday usability. Sporty handling with a matched suspension setup The springs and dampers of the KW V1 are matched to the specific vehicle application at the factory, so no separate damper adjustment is required. The sporty yet balanced setup reduces body roll and provides more direct handling without making the Mustang unnecessarily uncompromising for everyday road use. Individually adjustable lowering The robust KW threaded adjustment allows the vehicle height to be individually set within the approved adjustment range. The stainless-steel struts of the KW inox-line and corrosion-resistant components are designed for long-term durability. Suitable for Mustang 6 Facelift and Mustang 7 This suspension is designed for suitable versions of the Ford Mustang 6 Facelift (2018–2023) and Ford Mustang 7 (2024–2026). It is suitable only for vehicles without electronic damper control / MagneRide. Please observe the vehicle-specific information and permitted axle loads stated in the supplied TÜV parts certificate. KW V1 coilover suspension with factory-configured damping characteristics Sporty yet balanced setup for road use Individually adjustable vehicle height KW stainless-steel “inox-line” technology Corrosion-resistant, durable components Ready-to-install, vehicle-specific complete suspension solution For vehicles without electronic damper control / MagneRide Supplied with TÜV parts certificate Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models without MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: no Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.
KW V3 Clubsport Coilover Kit for Mustang 6 FL + Mustang 7 with MagneRide incl. Top Mounts
The KW V3 Clubsport is designed for Mustang drivers who want to use their car not only for spirited road driving but also for track days. Compared with a conventional road suspension, its focus is significantly more performance-oriented, providing precise handling, direct feedback and extensive adjustment options for different vehicles, tyres and driving conditions. Rebound and compression damping can be adjusted independently. This allows the suspension setup to be tailored to different tyres, vehicle weights and track conditions. Rebound damping offers 16 adjustment positions, while compression damping offers 12. For track days and performance road driving The V3 Clubsport combines the adjustment capabilities of a motorsport-oriented suspension with a road-compatible configuration supplied with German parts approval. KW inox-line stainless-steel technology and high-quality suspension components provide a durable basis even for demanding use. Ride height can be continuously adjusted within the approved adjustment range. Independent rebound and compression adjustment allows steering response, body movement, grip and vehicle balance to be fine-tuned to suit the intended use. For vehicles with MagneRide This version is intended for vehicles equipped with factory electronic damper control (MagneRide). When the KW V3 Clubsport is installed, the factory electronic damping system is no longer used and must therefore be deactivated. Important: The required KW MagneRide cancellation kit is NOT included with this suspension and must be purchased separately. Top mounts included The suspension is supplied including front axle top mounts, providing a particularly performance-focused solution and allowing more precise chassis setup. Product features KW V3 Clubsport coilover suspension front axle top mounts included for vehicles with MagneRide KW MagneRide cancellation kit required – not included 16-position adjustable rebound damping 12-position adjustable compression damping independent rebound and compression adjustment continuously adjustable ride height within the approved range KW inox-line stainless-steel technology designed for track days and performance road driving supplied with German parts approval Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models equipped with MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: yes KW MagneRide cancellation kit: required and sold separately Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.
KW V3 Clubsport Coilover Suspension for Mustang 6 Facelift & Mustang 7 – without MagneRide
The KW V3 Clubsport coilover suspension is designed for Mustang drivers who want to use their car not only for spirited road driving but also for track days. Developed using KW's extensive motorsport experience, the V3 Clubsport combines precise handling, individually adjustable damping and the flexibility required for demanding driving conditions. With independently adjustable rebound and compression damping, the suspension can be fine-tuned to suit different driving styles, tyre combinations and track conditions. The included adjustable top mounts provide additional setup possibilities for drivers looking to optimise their Mustang's handling. Individually adjustable damping The KW V3 Clubsport allows rebound damping to be adjusted in 16 clicks and low-speed compression damping in 12 clicks. Both settings can be adjusted independently, allowing the suspension setup to be adapted to the vehicle and its intended use. Developed for demanding driving conditions Whether on winding country roads, mountain passes or during track days, the KW V3 Clubsport offers precise suspension control and extensive adjustment possibilities. Its track-oriented design makes it particularly suitable for Mustang drivers who want to take their chassis setup to the next level. Product features KW V3 Clubsport coilover suspension Independently adjustable rebound and compression damping 16-click rebound adjustment 12-click low-speed compression adjustment KW inox-line stainless steel technology Height-adjustable suspension Adjustable front top mounts included Suitable for road and track day use For vehicles without MagneRide With TÜV parts certificate Vehicle applications Mustang 7 (2024 onwards) – GT and Dark Horse Mustang 6 Facelift (2018–2023) – 2.3 EcoBoost, GT, Bullitt and Mach 1 Maximum permissible axle loads: Front axle: up to 1,115 kg Rear axle: up to 1,120 kg Important: This suspension is designed exclusively for vehicles without MagneRide or factory electronic damper control.
KW V3 Coilover Kit for Mustang 6 FL + Mustang 7
The KW V3 coilover kit is designed for Mustang drivers who want more than just a lower ride height. In addition to height adjustment, the V3 allows the rebound and compression damping to be adjusted separately, making it possible to fine-tune the suspension to suit your driving style and preferred setup. This version is designed for Ford Mustang 6 Facelift and Mustang 7 models without electronic damper control (MagneRide). Individually adjustable damping Rebound damping can be adjusted through 16 click positions, allowing you to influence body movement, stability and vehicle response. Compression damping can be adjusted separately through 12 click positions. This makes it possible to adapt the suspension to different wheel and tyre combinations, personal driving preferences or a more performance-focused setup. Rebound and compression can be adjusted independently, allowing specific aspects of the suspension setup to be changed without having to alter the complete damper configuration. Continuously adjustable ride height The threaded height adjustment allows the vehicle ride height to be set individually within the approved adjustment range. KW inox-line stainless-steel technology and the robust adjustment mechanism are designed for reliable long-term height adjustment. For Mustang 6 FL and Mustang 7 Depending on the vehicle specification, this suspension is suitable for Mustang 6 Facelift and Mustang 7 models. Vehicle year, engine, axle loads and equipment must be considered when checking compatibility. This version is not suitable for vehicles equipped with MagneRide or electronic damper control. Product features KW V3 coilover suspension with inox-line stainless-steel technology independently adjustable rebound and compression damping 16-position rebound adjustment 12-position compression adjustment continuously adjustable vehicle ride height sport-oriented setup with extensive individual adjustment options height adjustment at front and rear axle for vehicles without MagneRide / electronic damper control supplied with German parts approval (Teilegutachten) Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models without MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 3.7 V6, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: no Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.
KW V3 Gewindefahrwerk für Mustang 6 FL + Mustang 7 mit MagneRide
The KW V3 coilover kit is designed for Mustang drivers who want individual control over both ride height and suspension setup. Rebound and compression damping can be adjusted separately, allowing the suspension to be fine-tuned to suit your driving style, tyres and intended use. This version is designed for Ford Mustang 6 Facelift and Mustang 7 models equipped with electronic damper control (MagneRide). As the factory electronic dampers are no longer used after installation of the KW V3, the required KW electronic damping cancellation kit is already included. Individually adjustable damping Rebound damping can be adjusted through 16 click positions, allowing you to influence body movement, stability and vehicle response. Compression damping can be adjusted separately through 12 click positions. This makes it possible to adapt the suspension to different wheel and tyre combinations, personal driving preferences or a more performance-focused setup. Rebound and compression can be adjusted independently, allowing specific aspects of the suspension behaviour to be changed without having to alter the complete damper setup. Continuously adjustable ride height The threaded height adjustment allows the vehicle ride height to be set individually within the approved adjustment range. KW inox-line stainless-steel technology and the robust adjustment mechanism are designed for reliable long-term height adjustment. MagneRide cancellation kit included Installation of this suspension replaces the factory electronically controlled dampers. The KW cancellation kit supplied with the suspension is designed for this application and is used to deactivate the factory electronic damper control. Product features KW V3 coilover suspension with inox-line stainless-steel technology independently adjustable rebound and compression damping 16-position rebound adjustment 12-position compression adjustment continuously adjustable vehicle ride height height adjustment at front and rear axle sport-oriented base setup with extensive individual adjustment options for vehicles equipped with MagneRide / electronic damper control KW electronic damping cancellation kit included supplied with German parts approval (Teilegutachten) Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models equipped with MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: yes KW MagneRide cancellation kit: included The factory electronic damper control is deactivated during installation. The required KW cancellation kit is already included with the suspension. Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.