Mustang 6 FL 2018-2023
Discover our tuning range for the Ford Mustang 6 Facelift from 2018 to 2023. Whether you're looking for more performance, an upgraded suspension or individual styling, you'll find selected products for your Mustang here.
Choose your category
Barracuda Karizzma 20” Wheel Set for Mustang 5, 6 & 7 – Mattblack Puresports
The Barracuda Karizzma is a distinctive 20-inch wheel with a sporty design. In this combination selected by Schropp, it is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. We have been fitting the Karizzma to Mustangs in exactly this combination for years: 9x20 ET40 on the front axle and 10.5x20 ET40 on the rear axle. This gives the Mustang a noticeably more substantial wheel and tyre appearance with a wider rear setup, using a combination that is well proven on our Mustang builds. Wheel set Front axle: 2x Barracuda Karizzma – 9x20 – ET40 Rear axle: 2x Barracuda Karizzma – 10.5x20 – ET40 Bolt pattern: 5x114.3 Finish: Mattblack Puresports Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 All models within the respective Mustang generations Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Karizzma wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Racing Lug Nuts M14x1.5 – Set of 20, 74 mm
The Barracuda Racing Lug Nuts combine distinctive racing-inspired styling with a high-quality two-piece construction. The set contains 20 M14x1.5 conical-seat lug nuts and is suitable for Mustang 6 and Mustang 7 models when used with compatible alloy wheels. The 74 mm Racing Lug Nuts are available in a range of colours, allowing the appearance to be matched individually to the wheels and vehicle. Aluminium styling combined with high-strength steel The visible heads are manufactured from high-quality anodised aluminium, while the load-bearing components are made from high-strength grade 10.9 steel. This construction combines the characteristic Barracuda Racing appearance with a robust technical basis for road use. Suitable for many alloy wheels Barracuda Racing Lug Nuts can be used with many compatible alloy wheels regardless of wheel manufacturer, provided that the wheel has the correct conical seat and sufficient clearance. A minimum wheel bolt hole diameter of 25 mm is required. When installed, the Racing Lug Nuts must not protrude beyond the outer edge of the wheel. Compatibility therefore always depends on the individual wheel design, seat and available clearance. Special adapter and additional theft protection The lug nuts are installed and removed using the special Barracuda wheel adapter. The dedicated tool design also provides additional protection against simply removing the wheels with conventional tools. Product features Set of 20 Barracuda Racing Lug Nuts Thread: M14x1.5 Conical seat Length: 74 mm Suitable for Mustang 6 and Mustang 7 with compatible wheels Suitable for many alloy wheels from different manufacturers Minimum 25 mm wheel bolt hole diameter required Anodised aluminium heads High-strength grade 10.9 steel components Available in various colours Special adapter for installation and removal Approved for road vehicles without additional registration – confirmation supplied with the product Vehicle applications Mustang 6 pre-facelift 2015–2017 Mustang 6 Facelift 2018–2023 Mustang 7 from model year 2024 Important: Compatibility depends on the wheel being used. Thread size, conical seat, wheel bolt hole diameter and available clearance must be checked before installation. The Racing Lug Nuts must not protrude beyond the outer edge of the wheel. Wheel stud length: The existing wheel stud length must be checked before installation. Depending on the vehicle and wheel combination, the studs may be too long and may need to be professionally shortened. Note: Example images. The actual colour may vary slightly depending on the selected version and display.
Barracuda Ultralight Dragoon 20” Wheel Set for Mustang 6 & 7 – Bronze
Limited availability: The Barracuda Ultralight Dragoon is being discontinued by Barracuda and is now available only in limited quantities. Continued availability therefore cannot be guaranteed. The Barracuda Ultralight Dragoon combines a distinctive sporting design with an eye-catching bronze finish. In our Mustang setup, the Dragoon is fitted in 10x20 ET40 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using the same wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET40 setup is a combination selected and proven by us for the Mustang. Wheel set Front axle: 2x Barracuda Ultralight Dragoon – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Dragoon – 10x20 – ET40 Bolt pattern: 5x114.3 Finish: Bronze Supplied with German TÜV parts certificate (Teilegutachten) for Ford Mustang type LAE Vehicle applications Ford Mustang 6 – from model year 2015 Ford Mustang 7 – from model year 2024 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Dragoon wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten) for Ford Mustang type LAE. The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 2 20” Wheel Set for Mustang 5, 6 & 7
The Barracuda Ultralight Project 2 combines a sporty multi-spoke design with a low wheel weight. In our Mustang setup, it is fitted in 9x20 ET40 on the front axle and 10.5x20 ET40 on the rear axle and is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. We offer the Project 2 in two finishes: Silver Brushed and Gunmetal. The desired finish can be selected when ordering. The 9x20 front and 10.5x20 rear setup is a combination selected and proven by us for the Mustang. 5 mm wheel spacers are part of this setup on the front axle and are already included with the wheel set. Wheel set Front axle: 2x Barracuda Ultralight Project 2 – 9x20 – ET40 Front wheel weight: 11.8 kg per wheel Rear axle: 2x Barracuda Ultralight Project 2 – 10.5x20 – ET40 Rear wheel weight: 12.2 kg per wheel Bolt pattern: 5x114.3 Finishes: Silver Brushed or Gunmetal 5 mm front axle wheel spacers included Supplied with German TÜV parts certificate (Teilegutachten) Product image note: The vehicle images show the Barracuda Ultralight Project 2 in Gunmetal. Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 All models within the respective Mustang generations Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 2 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 3.0 20” Wheel Set for Mustang – Flash Colours
The Barracuda Ultralight Project 3.0 is anything but an ordinary black wheel. Its gloss black finish is combined with machined spoke contours in striking Flash colours. Especially in direct sunlight, the coloured details create an eye-catching effect that emphasises the wheel design. In our Mustang setup, the Project 3.0 is fitted in 10x20 ET40 on all four corners, creating a sporty and balanced wheel and tyre appearance with identical wheel dimensions on the front and rear axles. Wheel set Front axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Bolt pattern: 5x114.3 Weight: 12.6 kg per wheel Base finish: Gloss Black Machined spoke contours in the selected Flash colour Supplied with German TÜV parts certificate (Teilegutachten) Flash colours Flash Red Flash Blue Flash Gold Flash Green Flash Copper Flash Orange The intensity of the machined coloured contours changes depending on the light. In direct sunlight in particular, the Flash colours become a real highlight. Vehicle applications Ford Mustang 6 Ford Mustang 7 Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 3.0 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 3.0 20” Wheel Set for Mustang 6 & 7 – Matt Black
The Barracuda Ultralight Project 3.0 combines a sporty multi-spoke design with a distinctive matt black finish and machined spoke contours. In our Mustang setup, it is fitted in 10x20 ET40 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using identical wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET40 setup is a combination selected and proven by us for the Mustang. Wheel set Front axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Bolt pattern: 5x114.3 Weight: 12.6 kg per wheel Finish: Matt Black with machined spoke contours Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 6 Ford Mustang 7 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 3.0 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
BMR 2-Point Chassis Brace CB007 for Mustang 2015–2023 – Black Hammertone
The BMR CB007 2-Point Chassis Brace reinforces the front K-member of the 2015–2023 Ford Mustang and reduces deflection under high longitudinal and lateral loads. The result is a more direct connection between the suspension and chassis, providing more precise steering feel and improved stability. The brace connects the rear sections of the front K-member, reinforcing an area that is subjected to particularly high loads during hard braking and cornering. Schropp experience – track proven in our SF600R We used this BMR Chassis Brace for many years on our Schropp SF600R, both on the road and on the race track. Particularly on a high-performance Mustang, reinforcing the front chassis structure provides a useful addition to the suspension setup. We especially recommend combining it with our Schropp strut tower brace. While the strut tower brace connects the upper section of the front chassis structure, the BMR Chassis Brace reinforces the K-member from underneath. Together, they provide effective chassis reinforcement and make the Mustang feel more direct and precise in response to steering inputs. Heavy-duty steel construction The CB007 is manufactured from heavy-duty 1 × 1.5-inch rectangular tubing and CNC-formed, laser-cut 3/16-inch steel plate. The construction is specifically designed to provide additional support for the factory Mustang K-member. The Black Hammertone finish is a dark grey to black textured powder coating that provides durable protection for the steel construction. 100% bolt-on installation The Chassis Brace installs using existing mounting points. No drilling or welding is required. The required installation hardware is included. BMR specifies an installation time of less than one hour. Vehicle applications 2015–2023 Ford Mustang Mustang GT 5.0 V8 Mustang EcoBoost 2.3 Mustang Bullitt Mustang Mach 1 Not compatible with Mustang V6 Mustang Shelby GT350 / GT350R V8 applications equipped with Kooks Long Tube Headers Vehicles equipped with a Moroso road-race oil pan Product features BMR part number CB007BH 2-point reinforcement of the front K-member Reduces K-member deflection under load More direct steering feel and improved stability Heavy-duty steel construction Black Hammertone powder-coated finish 100% bolt-on installation using existing mounting points No drilling or welding required Installation hardware included Made in the USA
BMR Driveshaft Safety Loop DSL017 for Mustang 2011–2026 – Black Hammertone
The BMR DSL017 Driveshaft Safety Loop is a heavy-duty safety restraint for the Ford Mustang driveshaft. Installed around the front section of the driveshaft, it is designed to help contain the driveshaft in this area underneath the vehicle in the event of a failure. The Safety Loop does not alter the operation of the driveshaft and is not a suspension or performance modification. Its purpose is to provide an additional level of protection in the event that a driveshaft or its connection fails under high load. What does a Driveshaft Safety Loop do? At high vehicle speeds, the driveshaft rotates at correspondingly high speed. In the unlikely event that it becomes disconnected or fails while driving, an uncontrolled driveshaft underneath the vehicle can potentially cause significant secondary damage. The BMR Safety Loop surrounds the front section of the driveshaft. In the event of a failure, it is designed to help contain the driveshaft in this area underneath the vehicle and thereby reduce the risk of additional damage. Additional protection at high speeds For a Mustang that is regularly driven at high speeds, a Driveshaft Safety Loop can provide a useful additional mechanical safeguard. On 2015 and later Mustang models, the factory driveshafts are already designed for the higher vehicle speeds these models can achieve. The Safety Loop is therefore not a prerequisite for higher-speed driving on these vehicles, but it can be installed as an additional mechanical safety measure. Particularly relevant for 2011–2014 Mustangs On 2011–2014 Mustang models, this becomes particularly relevant when the factory speed limiter is removed. Especially on V6 models, it should be taken into account that the factory driveshaft was not designed for unrestricted increases in vehicle speed. A Safety Loop does not make an unsuitable driveshaft safe for higher speeds and does not replace any necessary driveshaft upgrade. It does, however, provide an additional safeguard for the worst-case scenario if the driveshaft or one of its connections should fail. Heavy-duty bolt-on construction The DSL017 is manufactured from 0.25-inch laser-cut steel plate and attaches to the factory transmission crossmember. Its fully bolt-on design requires no welding. High-strength Grade 8 mounting hardware is included. BMR specifies an installation time of approximately one hour. Vehicle applications 2011–2014 Ford Mustang 2015–2023 Ford Mustang 2024 and later Ford Mustang Suitable for various engines and model variants Compatible with MGW shifters Product features BMR part number DSL017 Additional driveshaft safety restraint Can help reduce the risk of secondary damage in the event of a driveshaft failure 0.25-inch laser-cut steel construction Black Hammertone finish Attaches to the factory transmission crossmember 100% bolt-on installation Grade 8 mounting hardware included No welding required Made in the USA
Corspeed DeVille 21” Wheel Set for Mustang 5, 6 & 7 - Gunmetal
The Corspeed DeVille combines a distinctive sporting design with the striking appearance of a 21-inch wheel. In our Mustang setup, it is fitted in 9x21 ET40 on the front axle and 10.5x21 ET40 on the rear axle and is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. The wider rear wheels emphasise the powerful proportions of the Mustang, while the 9x21 front wheels create a balanced and sporty overall appearance. This is a combination selected and proven by us for the Mustang. The Corspeed DeVille is available from us in Matt Gunmetal. Wheel set Front axle: 2x Corspeed DeVille – 9x21 – ET40 Rear axle: 2x Corspeed DeVille – 10.5x21 – ET40 Bolt pattern: 5x114.3 Finish: Matt Gunmetal Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your 21-inch Corspeed DeVille wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Corspeed Kharma 20” Wheel Set for Mustang 6 & 7 - Silver
The Corspeed Kharma combines a distinctive sporting design with wheel dimensions particularly well suited to the Mustang. In our setup, it is fitted in 10x20 ET35 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using identical wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET35 setup is a combination selected and proven by us for the Mustang. The Corspeed Kharma is available from us in Silver Brushed. Wheel set Front axle: 2x Corspeed Kharma – 10x20 – ET35 Rear axle: 2x Corspeed Kharma – 10x20 – ET35 Bolt pattern: 5x114.3 Finish: Silver Brushed Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 6 Ford Mustang 7 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Corspeed Kharma wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Eibach 18mm Black Wheel Spacers incl. Black Shank Nuts / Set per Axle
Eibach Pro-Spacer System 6 wheel spacers in black. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
Eibach 18mm Silver Wheel Spacers incl. Black Shank Nuts / Set per Axle
Eibach Pro-Spacer System 6 wheel spacers in silver. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
Eibach Anti-Roll Kit Sway Bars for Mustang 6 + Mustang 7
For us, the Eibach Anti-Roll Kit is one of the most effective suspension upgrades available for the Mustang. The uprated anti-roll bars reduce body roll and give the car a more precise and controlled feel, particularly through fast corners and quick changes of direction – without having to replace the complete suspension. This is not a product we only know from a catalogue. At Schropp, we have installed these Eibach anti-roll bars on numerous Mustangs and use them on our own cars as well. They can be found on our SF600R, our Mustang Gen 7 and even on the OVR Racing Mustang built for the Nürburgring 24-hour race. From road cars to serious track use, this wide range of applications is one of the reasons why we rate this setup so highly. Less body roll, more precise handling During fast cornering, wheel load is transferred between the inside and outside of the car. The stiffer Eibach anti-roll bars counteract the resulting body roll, helping the Mustang feel more stable during changes of direction and respond more precisely to steering inputs. The kit consists of a 35 mm tubular front anti-roll bar and a 24.5 mm tubular rear anti-roll bar. Both bars are 3-way adjustable, allowing their effect to be matched to the vehicle setup, tyres and individual driving style. 3-way adjustable The different mounting positions allow the effective stiffness of the anti-roll bars to be changed. This also makes it possible to influence the handling balance between the front and rear axle. Depending on the chosen settings, the car can be tuned towards a more neutral balance or its tendency towards understeer or oversteer can be altered. For a good starting point, we recommend a balanced base setting. Any further adjustment should always take the complete vehicle setup, tyres and intended use into account. Product features Eibach Anti-Roll Kit for front and rear axle Front: 35 mm tubular anti-roll bar, 3-way adjustable Rear: 24.5 mm tubular anti-roll bar, 3-way adjustable Reduces body roll during cornering More direct and precise handling through corners and quick direction changes Adjustable front and rear bars allow the handling balance to be fine-tuned Suitable for performance-oriented road and track-focused vehicle setups Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Mustang 7 from model year 2024: 5.0 GT and Dark Horse Mustang 6 Facelift from model year 2018: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 6 pre-facelift 2015–2017: 2.3 EcoBoost, 5.0 GT and 3.7 V6
Eibach Pro-Kit Lowering Springs for Mustang EcoBoost 2015–2021 – Non-MagneRide
The Eibach Pro-Kit E10-35-029-01-22 is Eibach's classic lowering spring set for the Ford Mustang EcoBoost. With a lowering of approximately 20–25 mm at the front and rear, it gives the Mustang a sportier ride height without creating an excessively lowered stance. The springs are designed for vehicles without MagneRide and are supplied with a German approval document. Sportier setup for the Mustang EcoBoost The moderate reduction in ride height lowers the vehicle's centre of gravity and reduces body movement, providing a more direct driving feel while also creating a more balanced appearance with less space between the tyres and wheel arches. The Eibach Pro-Kit is designed for use with the factory shock absorbers, making it particularly suitable for drivers looking for moderate lowering and a sportier setup without replacing the complete suspension system. Lowering Front axle: approx. 20–25 mm Rear axle: approx. 20–25 mm Vehicle applications Ford Mustang EcoBoost 2.3 Model years 2015–2021 Vehicles without MagneRide only Maximum front axle load: 1035 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1035 kg at the front and 1150 kg at the rear. Not suitable for vehicles equipped with MagneRide. Supplied with approval document The spring set is supplied with a German approval document. All requirements and instructions specified in the document must be observed during installation and approval. Product features Eibach part number E10-35-029-01-22 Eibach Pro-Kit lowering springs Specifically for Mustang EcoBoost Front lowering approx. 20–25 mm Rear lowering approx. 20–25 mm For vehicles without MagneRide Front axle load up to 1035 kg Rear axle load up to 1150 kg Supplied with German approval document
Eibach Pro-Kit Lowering Springs for Mustang EcoBoost 2018–2021 – with MagneRide
The Eibach Pro-Kit E10-35-045-01-22 is the Eibach lowering spring set for the Ford Mustang EcoBoost equipped with MagneRide. With a lowering of approximately 20 mm at the front and rear, it gives the Mustang a sportier ride height without creating an excessively lowered stance. The springs are specifically designed for vehicles with electronically controlled dampers and MagneRide and are supplied with a German approval document. Sportier setup for the Mustang EcoBoost The moderate reduction in ride height lowers the vehicle's centre of gravity and reduces body movement, providing a more direct driving feel while also creating a more balanced appearance with less space between the tyres and wheel arches. The Eibach Pro-Kit is designed for use with the factory MagneRide dampers, making it suitable for drivers who want to retain the adaptive factory suspension while moderately lowering their Mustang. Lowering Front axle: approx. 20 mm Rear axle: approx. 20 mm Vehicle applications Ford Mustang EcoBoost 2.3 Model years 2018–2021 Vehicles with MagneRide Maximum front axle load: 1035 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1035 kg at the front and 1150 kg at the rear. Important information for MagneRide vehicles After installing the lowering springs, the MagneRide system must be recalibrated. Due to the changed ride height, the ride-height sensors and MagneRide control system need to be adapted to the new vehicle height to ensure that the adaptive suspension continues to operate correctly. Supplied with approval document The spring set is supplied with a German approval document. All requirements and instructions specified in the document must be observed during installation and approval. Product features Eibach part number E10-35-045-01-22 Eibach Pro-Kit lowering springs Specifically for Mustang EcoBoost with MagneRide Front lowering approx. 20 mm Rear lowering approx. 20 mm For vehicles with electronically controlled dampers MagneRide recalibration required after installation Front axle load up to 1035 kg Rear axle load up to 1150 kg Supplied with German approval document
Eibach Pro-Spacer 30 mm Wheel Spacers Black for Mustang 2015–2023
The Eibach Pro-Spacer S90-6-15-056-B gives your Ford Mustang a wider, more purposeful stance by positioning the wheels further out in the wheel arches. The system increases the track width by 15 mm per side or 30 mm per axle. The wheel spacers feature a black anodised finish and are suitable for both the front and rear axle of the 2015–2023 Ford Mustang (type LAE). 15 mm per side / 30 mm per axle Manufacturer: Eibach Product line: Pro-Spacer System 6 Eibach part number: S90-6-15-056-B Thickness: 15 mm per side Track increase: 30 mm per axle Finish: Black Installation: with extended wheel studs Approval document: included Installation With this system, the original Mustang wheel studs are replaced by the extended wheel studs supplied with the kit. The spacers are then installed between the wheel hub and wheel. Please note: One set is intended for one axle. If you want to install the spacers on both the front and rear axle, you will need two sets. Vehicle application Ford Mustang type LAE model years 2015–2023 front axle rear axle Note: The product image shown is an example image.
Eibach Pro-Spacer 40 mm Wheel Spacers Black for Mustang 2015–2023
The Eibach Pro-Spacer S90-4-20-044-B gives your Ford Mustang a wider, more purposeful stance by positioning the wheels further out in the wheel arches. The system increases the track width by 20 mm per side or 40 mm per axle. The wheel spacers feature a black anodised finish and are suitable for both the front and rear axle of the 2015–2023 Ford Mustang (type LAE). 20 mm per side / 40 mm per axle Manufacturer: Eibach Product line: Pro-Spacer System 4 Eibach part number: S90-4-20-044-B Thickness: 20 mm per side Track increase: 40 mm per axle Finish: Black Approval document: included Installation With the Pro-Spacer System 4, the wheel spacers are mounted to the wheel hub. The factory wheel studs may extend beyond the surface of the installed spacer. Important – check your wheels before ordering: Installation is only possible with wheels that have suitable pockets or recesses on the rear. These recesses must be deep enough to accommodate the remaining length of the factory wheel studs protruding beyond the installed spacer. If the recesses are not deep enough, the factory wheel studs must be shortened accordingly for installation. Please note: One set is intended for one axle. If you want to install the spacers on both the front and rear axle, you will need two sets. Vehicle application Ford Mustang type LAE model years 2015–2023 front axle rear axle Note: The product image shown is an example image.
Eibach Pro-Street-S Coilover Suspension for Mustang 6 FL 2018–2023 – Non-MagneRide
The Eibach Pro-Street-S coilover suspension PSS65-35-029-02-22 combines individually adjustable ride height with a sporty suspension setup for the facelift Ford Mustang 6. It is specifically designed for vehicles without MagneRide. The threaded height adjustment allows the vehicle's ride height to be set within the specified adjustment range, providing the flexibility to tailor the lowering to the desired appearance and intended use of the Mustang. Individually adjustable lowering Front axle: approx. 20–40 mm Rear axle: approx. 15–35 mm Unlike a lowering spring kit, the Pro-Street-S also replaces the shock absorbers. Springs and dampers are engineered as a complete suspension system, providing a sportier and more controlled suspension characteristic. Sporty setup with everyday usability Eibach developed the Pro-Street-S to combine sporty handling with ride comfort suitable for road use. The reduced ride height lowers the vehicle's centre of gravity and supports more precise handling, particularly during quick changes of direction and cornering. The damper housings feature a stainless-steel construction. Eibach uses spring perches made from a polyamide composite material to provide high corrosion resistance around the threaded height adjustment. Vehicle applications Ford Mustang 6 Facelift 2018–2023 Vehicles without MagneRide Maximum front axle load: 1107 kg Maximum rear axle load: 1120 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1107 kg at the front and 1120 kg at the rear. This suspension is not suitable for vehicles equipped with MagneRide. Supplied with approval document The Eibach Pro-Street-S is supplied with a German approval document. All requirements and instructions specified in the approval document and the Eibach installation instructions must be observed during installation, adjustment and approval. Product features Eibach part number PSS65-35-029-02-22 Height-adjustable Pro-Street-S coilover suspension Complete spring and damper system Front lowering approx. 20–40 mm Rear lowering approx. 15–35 mm Sport-oriented suspension setup Stainless-steel damper housings Threaded ride-height adjustment Polyamide composite spring perches For vehicles without MagneRide Front axle load up to 1107 kg Rear axle load up to 1120 kg Supplied with German approval document
Eibach Pro-Street-S Coilover Suspension for Mustang 6 FL 2018–2023 – with MagneRide
The Eibach Pro-Street-S coilover suspension PSS65-35-029-03-22 combines individually adjustable ride height with a sporty suspension setup for the facelift Ford Mustang 6 equipped with MagneRide. The Pro-Street-S replaces the factory electronically controlled MagneRide dampers with conventional sport dampers. Threaded height adjustment allows the vehicle's ride height to be set within the specified adjustment range. Individually adjustable lowering Front axle: approx. 20–40 mm Rear axle: approx. 15–35 mm Springs and dampers are engineered as a complete suspension system, providing a sportier and more controlled suspension characteristic while allowing the ride height to be individually adjusted. Sporty setup with everyday usability Eibach developed the Pro-Street-S to combine sporty handling with ride comfort suitable for road use. The reduced ride height lowers the vehicle's centre of gravity and supports more precise handling, particularly during quick changes of direction and cornering. The damper housings feature a stainless-steel construction. Eibach uses spring perches made from a polyamide composite material to provide high corrosion resistance around the threaded height adjustment. Vehicle applications Ford Mustang 6 Facelift 2018–2023 Vehicles with MagneRide Maximum front axle load: 1095 kg Maximum rear axle load: 1095 kg Important for MagneRide vehicles: As the Pro-Street-S replaces the electronically controlled MagneRide dampers, a separate electronic damper cancellation kit is required. The cancellation kit is not included with the suspension and must be ordered separately. Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1095 kg at the front and 1095 kg at the rear. Supplied with approval document The Eibach Pro-Street-S is supplied with a German approval document. All requirements and instructions specified in the approval document and installation instructions must be observed during installation, adjustment and approval. Product features Eibach part number PSS65-35-029-03-22 Height-adjustable Pro-Street-S coilover suspension Complete spring and damper system For facelift Mustang 6 with MagneRide Front lowering approx. 20–40 mm Rear lowering approx. 15–35 mm Sport-oriented suspension setup Stainless-steel damper housings Threaded ride-height adjustment Polyamide composite spring perches Front axle load up to 1095 kg Rear axle load up to 1095 kg Separate MagneRide cancellation kit required Cancellation kit not included Supplied with German approval document
Ford Performance Brembo 6-Piston Brake Kit M-2300-V for Mustang 2015–2023
Upgrade your Ford Mustang GT, 2.3 EcoBoost or 3.7 V6 with the Ford Performance M-2300-V front brake kit featuring powerful 6-piston Brembo calipers. The system combines satin black Brembo aluminium calipers with large 15-inch vented brake rotors. This brake system was original equipment on the 2015–2023 Mustang GT Performance Package, making it a proven Ford OEM-based upgrade for your Mustang. 6-piston Brembo brake system Manufacturer: Ford Performance Ford Performance part number: M-2300-V Brake calipers: Brembo 6-piston aluminium calipers Finish: Satin Black Brake rotors: 15-inch vented rotors Installation position: Front axle Original equipment on the 2015–2023 Mustang GT Performance Package What's included Brembo 6-piston brake calipers 15-inch vented brake rotors brake pads dust shields installation hardware front brake hoses for installation on 2.3 EcoBoost models The brake hoses supplied with the kit are required when installing the 6-piston calipers on 2.3 EcoBoost models. These hoses are not used when installing the kit on Mustang GT 5.0 V8 models. Vehicle application 2015–2023 Ford Mustang GT 5.0 V8 2015–2023 Ford Mustang 2.3 EcoBoost 2015–2017 Ford Mustang 3.7 V6 Important – check wheel clearance: The large 6-piston Brembo calipers require sufficient clearance between the brake caliper and wheel. Please verify that your wheels provide sufficient clearance for this brake system before ordering. Optional installation and approval at Schropp If you would like to order the brake kit from us and have it installed at our workshop, we can also offer the complete package including professional installation and approval inspection. Please contact us before ordering. We can then check the combination with your existing wheels and the requirements for approval.
Ford Performance Oil-Free Replacement Air Filter for Mustang Shelby GT500 2010–2014 & GT350 2015–2020
The Ford Performance replacement air filter M-9601-G is a washable and reusable high-flow air filter for selected Ford Performance applications. Mustang fitment includes the 2010–2014 Shelby GT500 with 5.4 and 5.8 Supercharged engines as well as the 2015–2020 Shelby GT350. The blue filter is manufactured by AIRAID for Ford Performance and uses a multi-layer cotton gauze filter construction. It is designed to provide high airflow while maintaining effective filtration. Washable, reusable and oil-free A key feature of the M-9601-G is its oil-free filter technology. There is no need to re-oil the filter after cleaning, making routine maintenance particularly straightforward. To service the filter, wash the filter element using a mild household detergent, rinse thoroughly and allow it to air dry completely before reinstalling it. Replacement air filter The Ford Performance air filter replaces the corresponding filter element in compatible applications. Its washable and reusable construction eliminates the need to routinely replace it with a new disposable paper filter during normal servicing. Mustang applications 2010–2012 Mustang Shelby GT500 – 5.4 Supercharged V8 2013–2014 Mustang Shelby GT500 – 5.8 Supercharged V8 2015–2020 Mustang Shelby GT350 – 5.2 V8 Ford Performance also lists this filter for several Ford Performance air intake systems and additional vehicle applications. For applications other than the Mustang models listed above, please verify compatibility using the Ford Performance part number. Product features Ford Performance part number M-9601-G Washable and reusable replacement air filter Multi-layer cotton gauze construction Designed for high airflow Oil-free – no re-oiling required after cleaning Easy to clean using mild household detergent and water Blue filter element Manufactured by AIRAID for Ford Performance
Ford Racing High-Flow Water Pump for Mustang 5.0 / 5.2
The Ford Racing M-8501-M52A High-Flow Water Pump is a useful upgrade for performance-driven Mustangs equipped with the 5.0L Coyote or 5.2L engine. Compared with the standard water pump, it provides up to 30% increased coolant flow, helping the cooling system cope with increased thermal loads. Reliable engine cooling becomes particularly important during prolonged high-load driving on the race track or spirited mountain-pass driving. This makes the upgraded water pump a worthwhile addition not only for modified Mustangs, but also for cars that regularly see demanding performance use. Race-track tested by Schropp We use this water pump ourselves in our 2003 Mustang track car with a Gen 2 Coyote swap. The improved cooling has proven itself during our own race-track use, including sessions at the Hockenheimring. For further optimisation of the cooling system, we recommend combining the pump with the Reische Performance Thermostat, part no. SW10433. Ford Racing performance version The M-8501-M52A uses OEM components selected by Ford Racing with tight allowable manufacturing tolerances. The kit includes the water pump, matching 3-bolt water pump pulley and the water-pump-to-block mounting bolts. The water pump hub is positioned at the same height as the standard 5.0L Coyote and naturally aspirated 5.2L applications. Also suitable for Mustang 7 Ford Racing officially lists the M-8501-M52A for 2011–2021 5.0L Coyote and 2015–2020 5.2L engines. However, the standard Ford BR3Z-8501-S water pump and corresponding BR3Z-8509-HA 3-bolt pulley continue to be used on the Mustang 7 with the Gen 4 5.0L Coyote. The basic factory water-pump configuration has therefore been carried over to the S650 generation. Note: Application to later 5.0L models, including Mustang 7, is based on the continued use of the corresponding factory water-pump and pulley configuration. Ford Racing's official application list for the M-8501-M52A has not yet been extended accordingly. Product features Up to 30% increased coolant flow compared with the standard pump Ford Racing performance water pump OEM components with tight allowable manufacturing tolerances 3-bolt water pump pulley included Water-pump-to-block mounting bolts included Factory hub height for 5.0L Coyote / naturally aspirated 5.2L applications Ideal for performance-driven and modified vehicles Used by Schropp in our own Coyote-swap track car Vehicle applications Mustang 5.0 GT 2011–2025 Mustang Bullitt 5.0 2019–2020 Mustang Mach 1 5.0 2021–2023 Mustang Dark Horse 5.0 2024–2025 Shelby GT350 / GT350R 5.2 2015–2020 Coyote swap applications using the corresponding water-pump and pulley configuration Ford Racing part number: M-8501-M52A
FTBR Differential Cooler Kit for Mustang GT 2015–2026
The Full Tilt Boogie Racing FT 570 Differential Cooler Kit is a complete active cooling system for the Mustang GT rear differential. It is designed for vehicles that experience significantly increased differential oil temperatures during race-track use or other sustained high-load driving conditions. The system combines a high-performance oil-to-air cooler with its own electric fan and a self-priming Tilton oil pump. Differential oil is actively circulated through the dedicated cooling circuit before being returned to the differential. The FTBR FT 570 is suitable for Mustang GT Coupé models of both the Mustang 6 and Mustang 7 generations. It is not suitable for Convertible models. Important when ordering: with or without OEM temperature sensor The kit is available in two configurations for vehicles with or without the factory differential temperature sensor. When ordering, please state in the order comments during checkout whether your Mustang is equipped with an OEM differential temperature sensor. Where fitted, the factory differential temperature sensor is located on the differential cover directly below the fill plug. Active cooling for demanding applications Differential oil temperatures can increase considerably during sustained high-load driving. Particularly for vehicles regularly used on the race track, controlling differential temperature is therefore an important part of maintaining a durable drivetrain. The FTBR differential cooler operates as a dedicated cooling circuit. A lightweight, self-priming Tilton pump circulates the differential oil through a high-performance plate-and-fin oil cooler. An electric curved-blade fan provides additional airflow through the cooler. Adjustable pump and fan control The kit includes an adjustable controller with wiring harness for operation of the pump and fan. The FT 570 is therefore more than an individual oil cooler: it is a complete system incorporating the cooling, plumbing and control components required for installation. Complete kit with prepared differential cover FTBR supplies a new differential cover with the required AN fittings and sensor ports pre-installed. The AN fittings are also pre-assembled onto the flexible premium black nylon race hose. Billet aluminium mounting brackets for the cooler and the required mounting and electrical hardware are also included. Kit contents High-performance plate-and-fin oil cooler Curved-blade electric fan, approx. 500 cfm Lightweight self-priming Tilton differential oil cooler pump Adjustable pump and fan controller with wiring harness New differential cover with pre-installed AN fittings and sensor ports Flexible premium black nylon race hose AN fittings pre-assembled on the hoses Billet aluminium oil cooler mounting brackets Required mounting and electrical hardware Inverted Torx socket for the OEM differential cover bolts Vehicle applications Mustang 6 GT Coupé 2015–2023 Mustang 7 GT Coupé from 2024 Available for vehicles equipped with the OEM differential temperature sensor Available for vehicles without the OEM differential temperature sensor Not suitable for Mustang Convertible models. Ordering information: Please state in the order comments during checkout whether your vehicle is equipped with or without the OEM differential temperature sensor. Full Tilt Boogie Racing part number: FT 570
Genuine Ford Gloss Black Pony Grille Emblem for Mustang 6
Genuine Ford Pony Emblem in gloss black for the front grille of 2015–2023 Mustang 6 models. The black emblem replaces the factory Pony badge in the grille and gives the front of the Mustang a darker and sportier appearance. As a genuine Ford OEM component, the emblem provides the correct shape and dimensions for the factory front grille. Black OEM styling The gloss black finish provides a subtle contrast and works particularly well with black wheels, dark exterior components and other black emblems. An ideal styling upgrade for owners looking to reduce the chrome accents on their Mustang while retaining a genuine Ford component. Product features Genuine Ford OEM Pony Emblem Gloss black finish For the front grille Direct replacement for the factory emblem Genuine Ford fit and finish Fits 2015–2023 Mustang 6 models Vehicle applications Mustang 6 Pre-Facelift 2015–2017 Mustang 6 Facelift 2018–2023 Package includes 1x Genuine Ford gloss black Pony Emblem for the front grille