Wheel Spacers
Eibach Pro-Spacer System 6 wheel spacers in black. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
Eibach Pro-Spacer System 6 wheel spacers in silver. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
The Eibach Pro-Spacer S90-6-15-056-B gives your Ford Mustang a wider, more purposeful stance by positioning the wheels further out in the wheel arches. The system increases the track width by 15 mm per side or 30 mm per axle. The wheel spacers feature a black anodised finish and are suitable for both the front and rear axle of the 2015–2023 Ford Mustang (type LAE). 15 mm per side / 30 mm per axle Manufacturer: Eibach Product line: Pro-Spacer System 6 Eibach part number: S90-6-15-056-B Thickness: 15 mm per side Track increase: 30 mm per axle Finish: Black Installation: with extended wheel studs Approval document: included Installation With this system, the original Mustang wheel studs are replaced by the extended wheel studs supplied with the kit. The spacers are then installed between the wheel hub and wheel. Please note: One set is intended for one axle. If you want to install the spacers on both the front and rear axle, you will need two sets. Vehicle application Ford Mustang type LAE model years 2015–2023 front axle rear axle Note: The product image shown is an example image.
The Eibach Pro-Spacer S90-4-20-044-B gives your Ford Mustang a wider, more purposeful stance by positioning the wheels further out in the wheel arches. The system increases the track width by 20 mm per side or 40 mm per axle. The wheel spacers feature a black anodised finish and are suitable for both the front and rear axle of the 2015–2023 Ford Mustang (type LAE). 20 mm per side / 40 mm per axle Manufacturer: Eibach Product line: Pro-Spacer System 4 Eibach part number: S90-4-20-044-B Thickness: 20 mm per side Track increase: 40 mm per axle Finish: Black Approval document: included Installation With the Pro-Spacer System 4, the wheel spacers are mounted to the wheel hub. The factory wheel studs may extend beyond the surface of the installed spacer. Important – check your wheels before ordering: Installation is only possible with wheels that have suitable pockets or recesses on the rear. These recesses must be deep enough to accommodate the remaining length of the factory wheel studs protruding beyond the installed spacer. If the recesses are not deep enough, the factory wheel studs must be shortened accordingly for installation. Please note: One set is intended for one axle. If you want to install the spacers on both the front and rear axle, you will need two sets. Vehicle application Ford Mustang type LAE model years 2015–2023 front axle rear axle Note: The product image shown is an example image.
The Eibach Pro-Spacer System 4 wheel spacers increase the track width of your Ford Mustang by 25 mm per side / 50 mm per axle. The black spacers provide a wider wheel stance and a more purposeful appearance. Suitable for the Ford Mustang type LAE, model years 2015–2017. 25 mm per side / 50 mm per axle One set is intended for one axle. If you want to install the spacers on both the front and rear axle, two sets are required. System 4 – check wheel pockets Important before installation: Installation is only possible with wheels that have suitable pockets on the rear face. These pockets must be deeper than the remaining length of the original wheel studs protruding beyond the spacer after installation. If the wheel pockets are not sufficiently deep, the wheel studs must be shortened accordingly. Product details Eibach Pro-Spacer System 4 25 mm track increase per side 50 mm track increase per axle black finish for Ford Mustang type LAE 2015–2017 one set for one axle supplied with Gutachten Example image.