Brakes

Upgrade your Ford Mustang GT, 2.3 EcoBoost or 3.7 V6 with the Ford Performance M-2300-V front brake kit featuring powerful 6-piston Brembo calipers. The system combines satin black Brembo aluminium calipers with large 15-inch vented brake rotors. This brake system was original equipment on the 2015–2023 Mustang GT Performance Package, making it a proven Ford OEM-based upgrade for your Mustang. 6-piston Brembo brake system Manufacturer: Ford Performance Ford Performance part number: M-2300-V Brake calipers: Brembo 6-piston aluminium calipers Finish: Satin Black Brake rotors: 15-inch vented rotors Installation position: Front axle Original equipment on the 2015–2023 Mustang GT Performance Package What's included Brembo 6-piston brake calipers 15-inch vented brake rotors brake pads dust shields installation hardware front brake hoses for installation on 2.3 EcoBoost models The brake hoses supplied with the kit are required when installing the 6-piston calipers on 2.3 EcoBoost models. These hoses are not used when installing the kit on Mustang GT 5.0 V8 models. Vehicle application 2015–2023 Ford Mustang GT 5.0 V8 2015–2023 Ford Mustang 2.3 EcoBoost 2015–2017 Ford Mustang 3.7 V6 Important – check wheel clearance: The large 6-piston Brembo calipers require sufficient clearance between the brake caliper and wheel. Please verify that your wheels provide sufficient clearance for this brake system before ordering. Optional installation and approval at Schropp If you would like to order the brake kit from us and have it installed at our workshop, we can also offer the complete package including professional installation and approval inspection. Please contact us before ordering. We can then check the combination with your existing wheels and the requirements for approval.

The MOV'IT high-performance brake system for the front axle of the 2015–2023 Ford Mustang combines large two-piece 396x36 mm steel brake rotors with MOV'IT 6s1 6-piston billet aluminium brake calipers. Developed specifically for the Mustang, the system is supplied as a complete front brake upgrade including vehicle-specific caliper adapters, comfort brake pads, braided brake lines and a German parts approval (Teilegutachten). MOV'IT 6-piston high-performance brake system Installation position: Front axle Brake calipers: MOV'IT 6s1 6-piston billet aluminium calipers Brake rotors: MOV'IT 396x36 mm high-performance steel rotors Design: Two-piece and internally ventilated Brake pads: MOV'IT Comfort BE-6s1 Brake lines: Teflon-coated braided stainless steel lines for front and rear axle Approval: German parts approval (Teilegutachten) included What's included 2x MOV'IT 6s1 brake calipers – left and right 2x MOV'IT 396x36 mm ventilated brake rotors – left and right 2x vehicle-specific brake caliper adapters 1x set of MOV'IT Comfort BE-6s1 brake pads 1x set of Teflon-coated braided brake lines for front and rear axle installation hardware installation instructions bedding-in instructions German parts approval (Teilegutachten) Track tested by Schropp Our experience with this MOV'IT brake system goes far beyond the specification sheet. We have used it in our Schropp SF600R from the beginning and have also put it through demanding track use at the Hockenheimring. Even under repeated heavy braking, the system allowed us to brake very late into the hairpin lap after lap and keep pace under braking with considerably more powerful cars such as Porsches. The brake system remained reliable and consistent throughout. One of our customers also regularly uses this system on the Nürburgring Nordschleife and has had very good experience with it under track conditions. Comfort or track use? The brake system is supplied as standard with MOV'IT Comfort BE-6s1 brake pads. Based on our experience, these are more than capable for spirited driving on country roads, motorways and mountain roads, providing a very good combination of performance and everyday usability. For regular track use, however, we recommend the optional MOV'IT Pro-Endura brake pads. These are available at additional cost and are the pads used both by us in the SF600R and by our customer for regular Nordschleife use. Colours The brake calipers are available from us in Red or Black. Additional RAL custom colours are available at extra cost – please contact us before ordering if you would like a custom colour. Important – check wheel clearance: The MOV'IT 396x36 mm brake system fits behind the factory 19-inch Ford wheels fitted to European-spec Mustangs as well as 19-inch ProTrack One wheels. Clearance with other aftermarket wheels must be checked individually due to differences in wheel design. If clearance with a particular aftermarket wheel is unknown, we recommend using a suitable 20-inch wheel setup to be on the safe side. Vehicle application 2015–2023 Ford Mustang Front axle