Skip to main content Skip to search Skip to main navigation

MOV’IT 6-Piston 370x35 mm Front Brake System for Mustang 2005–2014

Product information "MOV’IT 6-Piston 370x35 mm Front Brake System for Mustang 2005–2014"

MOV’IT high-performance front brake system for the Ford Mustang 2005–2014.

The MOV’IT steel brake system combines powerful braking performance with high-quality components specifically engineered to work together. At its heart are MOV’IT 6s5 6-piston aluminium brake calipers combined with two-piece, double-ventilated 370x35 mm steel brake discs.

The system is designed for drivers looking for a higher-performance brake system with increased thermal capacity and precise modulation compared with the factory brakes – for sporty road use as well as vehicles subjected to higher braking loads.

MOV’IT 6-piston brake system

  • MOV’IT 6s5 6-piston aluminium brake calipers
  • 370x35 mm MOV’IT steel brake discs
  • two-piece brake disc construction
  • double-ventilated brake discs
  • MOV’IT Comfort BE-6s1 brake pads
  • vehicle-specific brake caliper adapters
  • braided brake lines for front and rear axles

370x35 mm two-piece steel brake discs

The two-piece MOV’IT steel brake discs measure 370 mm in diameter and 35 mm in thickness and provide significantly greater thermal capacity than the factory brake system. Double ventilation supports heat dissipation under high braking loads.

Combined with the 6-piston calipers, the components form a matched braking system designed to provide consistent and controllable braking performance.

Scope of delivery

  • 2x MOV’IT 6s5 6-piston brake caliper – left and right
  • 2x MOV’IT 370x35 mm double-ventilated steel brake disc – left and right
  • 2x vehicle-specific brake caliper adapter
  • 1x set of MOV’IT Comfort BE-6s1 brake pads
  • 1x set of Teflon-coated braided brake lines for front and rear axles
  • installation hardware
  • installation instructions
  • bedding-in instructions
  • Teilegutachten or comparative approval documentation depending on the respective vehicle specification

Check wheel clearance

Minimum 18-inch wheels required.

Wheel diameter alone does not automatically guarantee sufficient clearance for the brake system. Wheel design, offset and the internal profile of the wheel all affect the available space.

If in doubt, please contact us before ordering so that wheel clearance can be checked.

Suitable for

  • Ford Mustang 2005–2014
  • front axle
  • 18-inch wheels or larger with sufficient brake clearance

Ordering information

MOV’IT brake systems are ordered and manufactured according to the respective vehicle configuration. Please make sure that complete and accurate vehicle information is provided when ordering.

Manufacturer information (GPSR)

MOV'IT GmbH
Auf der Heide 7
65553 Limburg
Deutschland
E-Mail: info@movitbrakes.com
Website: www.movitbrakes.com