Sport Suspension Kits

The Eibach Pro-Street-S coilover suspension PSS65-35-029-02-22 combines individually adjustable ride height with a sporty suspension setup for the facelift Ford Mustang 6. It is specifically designed for vehicles without MagneRide. The threaded height adjustment allows the vehicle's ride height to be set within the specified adjustment range, providing the flexibility to tailor the lowering to the desired appearance and intended use of the Mustang. Individually adjustable lowering Front axle: approx. 20–40 mm Rear axle: approx. 15–35 mm Unlike a lowering spring kit, the Pro-Street-S also replaces the shock absorbers. Springs and dampers are engineered as a complete suspension system, providing a sportier and more controlled suspension characteristic. Sporty setup with everyday usability Eibach developed the Pro-Street-S to combine sporty handling with ride comfort suitable for road use. The reduced ride height lowers the vehicle's centre of gravity and supports more precise handling, particularly during quick changes of direction and cornering. The damper housings feature a stainless-steel construction. Eibach uses spring perches made from a polyamide composite material to provide high corrosion resistance around the threaded height adjustment. Vehicle applications Ford Mustang 6 Facelift 2018–2023 Vehicles without MagneRide Maximum front axle load: 1107 kg Maximum rear axle load: 1120 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1107 kg at the front and 1120 kg at the rear. This suspension is not suitable for vehicles equipped with MagneRide. Supplied with approval document The Eibach Pro-Street-S is supplied with a German approval document. All requirements and instructions specified in the approval document and the Eibach installation instructions must be observed during installation, adjustment and approval. Product features Eibach part number PSS65-35-029-02-22 Height-adjustable Pro-Street-S coilover suspension Complete spring and damper system Front lowering approx. 20–40 mm Rear lowering approx. 15–35 mm Sport-oriented suspension setup Stainless-steel damper housings Threaded ride-height adjustment Polyamide composite spring perches For vehicles without MagneRide Front axle load up to 1107 kg Rear axle load up to 1120 kg Supplied with German approval document

The Eibach Pro-Street-S coilover suspension PSS65-35-029-03-22 combines individually adjustable ride height with a sporty suspension setup for the facelift Ford Mustang 6 equipped with MagneRide. The Pro-Street-S replaces the factory electronically controlled MagneRide dampers with conventional sport dampers. Threaded height adjustment allows the vehicle's ride height to be set within the specified adjustment range. Individually adjustable lowering Front axle: approx. 20–40 mm Rear axle: approx. 15–35 mm Springs and dampers are engineered as a complete suspension system, providing a sportier and more controlled suspension characteristic while allowing the ride height to be individually adjusted. Sporty setup with everyday usability Eibach developed the Pro-Street-S to combine sporty handling with ride comfort suitable for road use. The reduced ride height lowers the vehicle's centre of gravity and supports more precise handling, particularly during quick changes of direction and cornering. The damper housings feature a stainless-steel construction. Eibach uses spring perches made from a polyamide composite material to provide high corrosion resistance around the threaded height adjustment. Vehicle applications Ford Mustang 6 Facelift 2018–2023 Vehicles with MagneRide Maximum front axle load: 1095 kg Maximum rear axle load: 1095 kg Important for MagneRide vehicles: As the Pro-Street-S replaces the electronically controlled MagneRide dampers, a separate electronic damper cancellation kit is required. The cancellation kit is not included with the suspension and must be ordered separately. Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1095 kg at the front and 1095 kg at the rear. Supplied with approval document The Eibach Pro-Street-S is supplied with a German approval document. All requirements and instructions specified in the approval document and installation instructions must be observed during installation, adjustment and approval. Product features Eibach part number PSS65-35-029-03-22 Height-adjustable Pro-Street-S coilover suspension Complete spring and damper system For facelift Mustang 6 with MagneRide Front lowering approx. 20–40 mm Rear lowering approx. 15–35 mm Sport-oriented suspension setup Stainless-steel damper housings Threaded ride-height adjustment Polyamide composite spring perches Front axle load up to 1095 kg Rear axle load up to 1095 kg Separate MagneRide cancellation kit required Cancellation kit not included Supplied with German approval document

The KW V1 coilover kit combines individually adjustable lowering with a sporty and balanced suspension setup. This version is designed for Ford Mustang models equipped with electronic damper control (MagneRide) and includes the KW cancellation kit for the factory electronic damper control system. The damping characteristics of the KW V1 are factory pre-configured specifically for the vehicle. Springs and dampers are matched to provide a balanced combination of sportier handling and everyday usability. Body roll and pitching movements are reduced, resulting in more direct and responsive handling. Continuously adjustable lowering The threaded adjustment allows the vehicle height to be individually set within the approved adjustment range. KW inox-line stainless-steel technology and the dirt-resistant threaded adjustment system provide durable and reliable height adjustment. For vehicles with MagneRide When replacing the factory electronically controlled suspension, the original electronic damper control is no longer used. The included KW cancellation kit is designed for this application and is used to deactivate the electronic damper control system. Product features KW V1 coilover kit from the inox-line range for Mustang models with electronic damper control / MagneRide includes KW cancellation kit for the electronic damper control system vehicle-specific factory pre-configured damping characteristics sporty and balanced suspension setup individually height adjustable corrosion-resistant stainless-steel technology ready-to-install suspension solution supplied with German parts approval (Teilegutachten) Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models equipped with MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: yes KW MagneRide cancellation kit: included The factory electronic damper control is deactivated during installation. The required KW cancellation kit is already included with the suspension. Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.

The KW V1 coilover suspension inox-line is an ideal choice for your 2018–2026 Ford Mustang without electronic damper control if you want to combine improved handling with individually adjustable lowering. Its vehicle-specific, factory-configured damper setup provides a well-balanced combination of direct handling, sporty performance and everyday usability. Sporty handling with a matched suspension setup The springs and dampers of the KW V1 are matched to the specific vehicle application at the factory, so no separate damper adjustment is required. The sporty yet balanced setup reduces body roll and provides more direct handling without making the Mustang unnecessarily uncompromising for everyday road use. Individually adjustable lowering The robust KW threaded adjustment allows the vehicle height to be individually set within the approved adjustment range. The stainless-steel struts of the KW inox-line and corrosion-resistant components are designed for long-term durability. Suitable for Mustang 6 Facelift and Mustang 7 This suspension is designed for suitable versions of the Ford Mustang 6 Facelift (2018–2023) and Ford Mustang 7 (2024–2026). It is suitable only for vehicles without electronic damper control / MagneRide. Please observe the vehicle-specific information and permitted axle loads stated in the supplied TÜV parts certificate. KW V1 coilover suspension with factory-configured damping characteristics Sporty yet balanced setup for road use Individually adjustable vehicle height KW stainless-steel “inox-line” technology Corrosion-resistant, durable components Ready-to-install, vehicle-specific complete suspension solution For vehicles without electronic damper control / MagneRide Supplied with TÜV parts certificate Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models without MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: no Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.

The KW V3 Clubsport is designed for Mustang drivers who want to use their car not only for spirited road driving but also for track days. Compared with a conventional road suspension, its focus is significantly more performance-oriented, providing precise handling, direct feedback and extensive adjustment options for different vehicles, tyres and driving conditions. Rebound and compression damping can be adjusted independently. This allows the suspension setup to be tailored to different tyres, vehicle weights and track conditions. Rebound damping offers 16 adjustment positions, while compression damping offers 12. For track days and performance road driving The V3 Clubsport combines the adjustment capabilities of a motorsport-oriented suspension with a road-compatible configuration supplied with German parts approval. KW inox-line stainless-steel technology and high-quality suspension components provide a durable basis even for demanding use. Ride height can be continuously adjusted within the approved adjustment range. Independent rebound and compression adjustment allows steering response, body movement, grip and vehicle balance to be fine-tuned to suit the intended use. For vehicles with MagneRide This version is intended for vehicles equipped with factory electronic damper control (MagneRide). When the KW V3 Clubsport is installed, the factory electronic damping system is no longer used and must therefore be deactivated. Important: The required KW MagneRide cancellation kit is NOT included with this suspension and must be purchased separately. Top mounts included The suspension is supplied including front axle top mounts, providing a particularly performance-focused solution and allowing more precise chassis setup. Product features KW V3 Clubsport coilover suspension front axle top mounts included for vehicles with MagneRide KW MagneRide cancellation kit required – not included 16-position adjustable rebound damping 12-position adjustable compression damping independent rebound and compression adjustment continuously adjustable ride height within the approved range KW inox-line stainless-steel technology designed for track days and performance road driving supplied with German parts approval Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models equipped with MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: yes KW MagneRide cancellation kit: required and sold separately Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.

The KW V3 Clubsport coilover suspension is designed for Mustang drivers who want to use their car not only for spirited road driving but also for track days. Developed using KW's extensive motorsport experience, the V3 Clubsport combines precise handling, individually adjustable damping and the flexibility required for demanding driving conditions. With independently adjustable rebound and compression damping, the suspension can be fine-tuned to suit different driving styles, tyre combinations and track conditions. The included adjustable top mounts provide additional setup possibilities for drivers looking to optimise their Mustang's handling. Individually adjustable damping The KW V3 Clubsport allows rebound damping to be adjusted in 16 clicks and low-speed compression damping in 12 clicks. Both settings can be adjusted independently, allowing the suspension setup to be adapted to the vehicle and its intended use. Developed for demanding driving conditions Whether on winding country roads, mountain passes or during track days, the KW V3 Clubsport offers precise suspension control and extensive adjustment possibilities. Its track-oriented design makes it particularly suitable for Mustang drivers who want to take their chassis setup to the next level. Product features KW V3 Clubsport coilover suspension Independently adjustable rebound and compression damping 16-click rebound adjustment 12-click low-speed compression adjustment KW inox-line stainless steel technology Height-adjustable suspension Adjustable front top mounts included Suitable for road and track day use For vehicles without MagneRide With TÜV parts certificate Vehicle applications Mustang 7 (2024 onwards) – GT and Dark Horse Mustang 6 Facelift (2018–2023) – 2.3 EcoBoost, GT, Bullitt and Mach 1 Maximum permissible axle loads: Front axle: up to 1,115 kg Rear axle: up to 1,120 kg Important: This suspension is designed exclusively for vehicles without MagneRide or factory electronic damper control.

The KW V3 coilover kit is designed for Mustang drivers who want more than just a lower ride height. In addition to height adjustment, the V3 allows the rebound and compression damping to be adjusted separately, making it possible to fine-tune the suspension to suit your driving style and preferred setup. This version is designed for Ford Mustang 6 Facelift and Mustang 7 models without electronic damper control (MagneRide). Individually adjustable damping Rebound damping can be adjusted through 16 click positions, allowing you to influence body movement, stability and vehicle response. Compression damping can be adjusted separately through 12 click positions. This makes it possible to adapt the suspension to different wheel and tyre combinations, personal driving preferences or a more performance-focused setup. Rebound and compression can be adjusted independently, allowing specific aspects of the suspension setup to be changed without having to alter the complete damper configuration. Continuously adjustable ride height The threaded height adjustment allows the vehicle ride height to be set individually within the approved adjustment range. KW inox-line stainless-steel technology and the robust adjustment mechanism are designed for reliable long-term height adjustment. For Mustang 6 FL and Mustang 7 Depending on the vehicle specification, this suspension is suitable for Mustang 6 Facelift and Mustang 7 models. Vehicle year, engine, axle loads and equipment must be considered when checking compatibility. This version is not suitable for vehicles equipped with MagneRide or electronic damper control. Product features KW V3 coilover suspension with inox-line stainless-steel technology independently adjustable rebound and compression damping 16-position rebound adjustment 12-position compression adjustment continuously adjustable vehicle ride height sport-oriented setup with extensive individual adjustment options height adjustment at front and rear axle for vehicles without MagneRide / electronic damper control supplied with German parts approval (Teilegutachten) Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models without MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 3.7 V6, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: no Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.

The KW V3 coilover kit is designed for Mustang drivers who want individual control over both ride height and suspension setup. Rebound and compression damping can be adjusted separately, allowing the suspension to be fine-tuned to suit your driving style, tyres and intended use. This version is designed for Ford Mustang 6 Facelift and Mustang 7 models equipped with electronic damper control (MagneRide). As the factory electronic dampers are no longer used after installation of the KW V3, the required KW electronic damping cancellation kit is already included. Individually adjustable damping Rebound damping can be adjusted through 16 click positions, allowing you to influence body movement, stability and vehicle response. Compression damping can be adjusted separately through 12 click positions. This makes it possible to adapt the suspension to different wheel and tyre combinations, personal driving preferences or a more performance-focused setup. Rebound and compression can be adjusted independently, allowing specific aspects of the suspension behaviour to be changed without having to alter the complete damper setup. Continuously adjustable ride height The threaded height adjustment allows the vehicle ride height to be set individually within the approved adjustment range. KW inox-line stainless-steel technology and the robust adjustment mechanism are designed for reliable long-term height adjustment. MagneRide cancellation kit included Installation of this suspension replaces the factory electronically controlled dampers. The KW cancellation kit supplied with the suspension is designed for this application and is used to deactivate the factory electronic damper control. Product features KW V3 coilover suspension with inox-line stainless-steel technology independently adjustable rebound and compression damping 16-position rebound adjustment 12-position compression adjustment continuously adjustable vehicle ride height height adjustment at front and rear axle sport-oriented base setup with extensive individual adjustment options for vehicles equipped with MagneRide / electronic damper control KW electronic damping cancellation kit included supplied with German parts approval (Teilegutachten) Does this suspension fit your Mustang? This suspension is suitable for the following Ford Mustang models equipped with MagneRide: Mustang 6 Facelift (S550), model year 2018 onwards / production from 11/2017: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 7 (S650), production from 02/2024: 5.0 GT and Dark Horse Maximum front axle load: 1,115 kg Maximum rear axle load: 1,120 kg Electronic damper control / MagneRide: yes KW MagneRide cancellation kit: included The factory electronic damper control is deactivated during installation. The required KW cancellation kit is already included with the suspension. Please check before ordering: Compare the model, production date and axle loads stated in your vehicle documents with the specifications above. Your vehicle's permitted axle loads must not exceed the maximum values stated above.