Rear Spoilers

Genuine Ford Performance GT350 Track Pack Rear Spoiler M-16600-GT350A for the Mustang 6 Fastback. This spoiler was original equipment on the Shelby GT350 equipped with the Track Package and combines distinctive GT350 styling with an aerodynamically functional spoiler design. At Schropp, this rear spoiler is exclusively offered as a complete package including professional installation and German TÜV/DEKRA/GTÜ modification approval. The spoiler is not offered for shipping and self-installation. Genuine Ford Performance GT350 Track Pack spoiler This is a genuine Ford Performance component, not a reproduction or aftermarket spoiler. Ford used this rear spoiler as original equipment on the Mustang Shelby GT350 equipped with the Track Package. The spoiler is supplied in Absolute Black Clearcoat and its low, sporty design complements the lines of the Mustang 6 Fastback. Professional installation at Schropp included The rear spoiler is bolted and bonded to the boot lid. Installation requires the necessary mounting holes to be drilled into the boot lid. Professional installation at Schropp is already included in this package. German approval included Following installation, the required German TÜV, DEKRA or GTÜ modification approval is carried out at our premises. This provides the genuine Ford Performance rear spoiler, professional installation and the required approval as one complete package. Product features Genuine Ford Performance component Ford Performance part number M-16600-GT350A Original equipment on the Mustang Shelby GT350 with Track Package For Mustang 6 Fastback / Coupe Finished in Absolute Black Clearcoat Aerodynamically functional spoiler design Bolted and bonded installation Mounting holes in the boot lid required Professional installation at Schropp included German TÜV / DEKRA / GTÜ approval included Not available for shipping and self-installation Vehicle applications Ford Mustang 6 Fastback / Coupe 2015–2023 Package and services included 1x genuine Ford Performance GT350 Track Pack Rear Spoiler Professional installation at Schropp German TÜV / DEKRA / GTÜ modification approval at Schropp Important: This product is exclusively offered with professional installation and German TÜV/DEKRA/GTÜ approval at Schropp. Shipping for self-installation is not available.

Genuine Ford Performance M-16600-FP Rear Spoiler for the Mustang 6 Fastback. This aggressive Ford rear spoiler was factory-fitted to selected GT350, GT500 and Mach 1 models and combines genuine Ford styling with a distinctly more purposeful rear appearance. At Schropp, this spoiler is exclusively offered as a complete package including professional installation and German TÜV/DEKRA approval. The spoiler is not offered for shipping and self-installation. Genuine Ford Performance component The spoiler is supplied in the original Gloss Black OEM finish. This is a genuine Ford Performance component rather than a reproduction or aftermarket copy. The design was factory-used on selected Mustang GT350, GT500 and Mach 1 models and combines distinctive styling with an aerodynamically functional spoiler design. Professional installation at Schropp included The rear spoiler is bolted to the boot lid. Depending on the vehicle's original equipment and any previously installed factory spoiler, the necessary mounting holes may need to be drilled into the boot lid. Professional installation at Schropp is already included in this package. German TÜV / DEKRA approval included Following installation, the required German TÜV, DEKRA or GTÜ modification approval is carried out at our premises. This provides the spoiler, professional installation and approval as one complete package. Important information about the Gurney flap The genuine Ford Performance kit also includes a removable Gurney flap. The Gurney flap is supplied with the product but is not installed by Schropp, as it is not covered by our modification approval. The Gurney flap is handed over separately to the customer. Any subsequent installation is the customer's responsibility and is not covered by the TÜV/DEKRA approval carried out by Schropp. Product features Genuine Ford Performance component Ford Performance part number M-16600-FP For Mustang 6 Fastback / Coupe Original Ford Gloss Black finish Bolted installation to the boot lid Professional installation at Schropp included German TÜV / DEKRA / GTÜ approval included Gurney flap included in the Ford kit but not covered by our approval Not available for shipping and self-installation Vehicle applications Ford Mustang 6 Fastback / Coupe 2015–2023 Package includes 1x genuine Ford Performance rear spoiler 1x Gurney flap – supplied separately and not installed Ford mounting hardware Ford installation template Professional installation at Schropp German TÜV / DEKRA modification approval at Schropp Important: This product is exclusively offered with professional installation and German TÜV/DEKRA approval at Schropp. Shipping for self-installation is not available. Our approval covers the installed rear spoiler without the Gurney flap.

Replacement support bases for the Schropp SF3 and SF4 Rear Wings. The bases sit on the boot lid and accommodate the aluminium supports of the rear wing. These replacement parts are manufactured using a modern 3D-printing process and replace the originally used plastic components. Ideal for replacing damaged original bases, including parts that may have cracked due to excessive temperatures during paint curing. The support bases are supplied in black and exclusively as a pair for the left and right sides. Important information for painting: The surface of the 3D-printed components must be properly prepared and finished before applying a high-quality paint finish. The parts are not intended to be painted directly without appropriate surface preparation. Scope of delivery 1x left support base 1x right support base Suitable for Schropp SF3 Rear Wing Schropp SF4 Rear Wing

Current availability: Due to the limited availability of individual components, this rear wing is currently unavailable. We are working to restore availability and plan to continue offering the rear wing. However, we cannot currently provide a confirmed delivery date. We expect the product to become available again in spring 2027. The Schropp SF3 Rear Wing is our large rear wing for the Mustang 6 Coupe. Our original Schropp design combines an aggressive, motorsport-inspired appearance with GT3 styling influences and clearly noticeable aerodynamic function. The SF3 is not simply a styling component. Its size and position in the airflow generate additional downforce at the rear axle, helping to provide a more settled and stable rear end, particularly at higher speeds. Known from our Schropp SF600R We used the SF3 ourselves on our former approximately 800 hp Schropp SF600R and were able to experience its aerodynamic influence very clearly. During Rolling 50 acceleration testing over a distance of one kilometre, the SF600R achieved an approximately 10 km/h lower terminal speed with the SF3 installed than without the rear wing. The comparison clearly demonstrates that the SF3 is actively working in the airflow: additional rear downforce from a large functional wing inevitably also creates additional aerodynamic drag. The difference was also clearly noticeable from the driver's perspective. This is why we consider the SF3 to be more than a visual modification – it is a functional rear wing for performance-oriented Mustangs. From the SF3 to the 24-hour race Mustang We also developed the concept further for motorsport. The OVR Racing Mustang, which competed at the Nürburgring 24 Hours, used a modified and higher-positioned version based on our SF3 design. The revised position of the rear wing provided the race car with additional aerodynamic stability at the rear axle. According to driver feedback, this additional stability addressed something they had previously been missing through certain sections of the Nürburgring Nordschleife. The racing version is not identical to the road product offered here, but demonstrates how the fundamental SF3 concept could be developed further for significantly more demanding motorsport use. Schropp design – distinctive and functional The large SF3 significantly changes the rear appearance of the Mustang 6. Its motorsport-inspired styling with GT3 influences works particularly well on cars where the suspension, wheels and other components already follow a performance-oriented concept. Behind the distinctive appearance is genuine aerodynamic function. The SF3 is therefore aimed at Mustang owners who want more than simply the visual presence of a large rear wing. Supplied with German TÜV parts approval – approved up to 300 km/h The Schropp SF3 is supplied with a German Teilegutachten (TÜV parts approval) and is approved under the terms of the documentation for a maximum vehicle speed of up to 300 km/h. A modification inspection is required after installation on the basis of the supplied Teilegutachten. Installation The SF3 is securely bolted to the boot lid. Installation therefore requires mounting holes to be drilled into the boot lid. The rear wing is supplied unpainted, allowing it to be finished to match the vehicle or the desired overall design. Product features Original Schropp design for Mustang 6 Motorsport-inspired styling with GT3 influences Large, aerodynamically functional rear wing Generates additional downforce at the rear axle Supports rear-end stability at higher speeds Known from our Schropp SF600R Motorsport experience from a modified SF3-based version used on the OVR Racing Mustang Securely bolted to the boot lid Drilling of the boot lid required Supplied unpainted Supplied with German Teilegutachten Approved under the documentation for speeds up to 300 km/h Vehicle applications Mustang 6 pre-facelift Coupe 2015–2017 Mustang 6 Facelift Coupe 2018–2023 Not suitable for Mustang Convertible models. Important when ordering: Please enter the vehicle's VIN (Vehicle Identification Number) in the order comments during checkout.

Current availability: Due to the limited availability of individual components, this rear wing is currently unavailable. We are working to restore availability and plan to continue offering the rear wing. However, we cannot currently provide a confirmed delivery date. We expect the product to become available again in spring 2027. The Schropp SF4 Rear Wing is our more subtle alternative to the large SF3 for the Mustang 6 Coupe. Our original Schropp design combines motorsport-inspired styling with GT4 influences and aerodynamic function, without sitting as high or appearing as aggressive as our SF3. We developed the SF4 particularly for Mustang owners who found the height and aggressive appearance of the SF3 too extreme but still wanted a functional rear wing. The more subtle alternative to the SF3 With its lower profile, the SF4 integrates more discreetly into the lines of the Mustang 6. It clearly changes the rear appearance of the car while remaining less visually dominant than our large SF3. This makes the SF4 particularly suitable for Mustangs that should retain a performance-oriented appearance without having the rear wing dominate the overall design of the car. Schropp design – more than just appearance As with the SF3, it was important to us that the SF4 should not simply be a styling component. Positioned in the vehicle's airflow, the wing generates additional downforce at the rear axle as speed increases. The SF4 can therefore help the rear of the Mustang feel more settled and stable at higher speeds. Compared with the considerably larger SF3, the concept is deliberately less aggressive. Proven on high-performance Mustangs The SF4 has also been used by customers with our Schropp supercharger conversions. Particularly on cars capable of regularly reaching higher speeds due to their significantly increased engine output, our customers have described the rear wing as a useful addition for increased rear-end stability. This makes the SF4 particularly interesting for high-performance road cars: an aerodynamic addition for higher-speed driving combined with a considerably more subtle appearance than our large SF3. Supplied with German TÜV parts approval – approved up to 300 km/h The Schropp SF4 is supplied with a German Teilegutachten (TÜV parts approval) and is approved under the terms of the documentation for a maximum vehicle speed of up to 300 km/h. A modification inspection is required after installation on the basis of the supplied Teilegutachten. Installation The SF4 is securely bolted to the boot lid. Installation therefore requires mounting holes to be drilled into the boot lid. The rear wing is supplied unpainted, allowing it to be finished to match the vehicle or the desired overall design. Product features Original Schropp design for Mustang 6 Motorsport-inspired styling with GT4 influences Lower and more subtle alternative to our SF3 Rear Wing Aerodynamically functional rear wing Generates additional downforce at the rear axle Supports rear-end stability at higher speeds Also used on high-performance Schropp supercharger builds Securely bolted to the boot lid Drilling of the boot lid required Supplied unpainted Supplied with German Teilegutachten Approved under the documentation for speeds up to 300 km/h Vehicle applications Mustang 6 pre-facelift Coupe 2015–2017 Mustang 6 Facelift Coupe 2018–2023 Not suitable for Mustang Convertible models. Important when ordering: Please enter the vehicle's VIN (Vehicle Identification Number) in the order comments during checkout.