Air Intakes without Tune
The Ford Performance M-9601-C replacement air filter is the replacement filter element for the Ford Performance M-9603-GT06 Cold Air Kit. It is the same type of filter used in the Ford Performance induction system and provides a direct replacement for the existing filter element. The conical high-flow air filter is constructed from multi-layer cotton gauze. This design is engineered to trap dirt from the intake air while providing less restriction than traditional paper filters. Cleanable and reusable Unlike a conventional disposable paper filter, the M-9601-C is cleanable and reusable, allowing the filter element to be used for an extended period with appropriate maintenance. Ford Performance specifies the M-9601-C as a dry air filter. The filter element is blue and features chrome-finished steel end caps. Replacement filter for M-9603-GT06 The M-9601-C is specifically intended as a replacement air filter for the Ford Performance M-9603-GT06 Cold Air Kit. It is ideal when the existing filter element needs to be replaced without replacing the complete cold air intake system. Product features Ford Performance part number M-9601-C Replacement filter for the Ford Performance M-9603-GT06 Cold Air Kit Conical high-flow air filter Multi-layer cotton gauze filter material Cleanable and reusable Dry air filter Blue filter element Steel end caps Chrome-finished end caps Quantity: 1 air filter Note: This product is intended as a replacement filter for the Ford Performance M-9603-GT06 Cold Air Kit. Please verify the part number of the existing intake system or filter element before ordering.
The Ford Performance replacement air filter M-9601-G is a washable and reusable high-flow air filter for selected Ford Performance applications. Mustang fitment includes the 2010–2014 Shelby GT500 with 5.4 and 5.8 Supercharged engines as well as the 2015–2020 Shelby GT350. The blue filter is manufactured by AIRAID for Ford Performance and uses a multi-layer cotton gauze filter construction. It is designed to provide high airflow while maintaining effective filtration. Washable, reusable and oil-free A key feature of the M-9601-G is its oil-free filter technology. There is no need to re-oil the filter after cleaning, making routine maintenance particularly straightforward. To service the filter, wash the filter element using a mild household detergent, rinse thoroughly and allow it to air dry completely before reinstalling it. Replacement air filter The Ford Performance air filter replaces the corresponding filter element in compatible applications. Its washable and reusable construction eliminates the need to routinely replace it with a new disposable paper filter during normal servicing. Mustang applications 2010–2012 Mustang Shelby GT500 – 5.4 Supercharged V8 2013–2014 Mustang Shelby GT500 – 5.8 Supercharged V8 2015–2020 Mustang Shelby GT350 – 5.2 V8 Ford Performance also lists this filter for several Ford Performance air intake systems and additional vehicle applications. For applications other than the Mustang models listed above, please verify compatibility using the Ford Performance part number. Product features Ford Performance part number M-9601-G Washable and reusable replacement air filter Multi-layer cotton gauze construction Designed for high airflow Oil-free – no re-oiling required after cleaning Easy to clean using mild household detergent and water Blue filter element Manufactured by AIRAID for Ford Performance
The K&N 33-2298 replacement air filter is a washable and reusable high-flow air filter for the Ford Mustang S197 with the 4.0 V6 and 4.6 V8 engines. It directly replaces the factory air filter inside the original airbox. The multi-layer K&N cotton filter media is oiled and designed to combine high airflow with effective filtration. The filter is supplied pre-oiled and ready to install. Direct replacement in the factory airbox The K&N 33-2298 is designed for the factory Mustang intake system. Simply remove the standard air filter from the original airbox and replace it with the K&N filter. No modifications to the factory airbox or changes to the engine calibration are required for installation of the replacement filter. Washable and reusable Unlike a conventional disposable paper filter, the K&N air filter is designed for repeated use. When required, the filter media can be cleaned using suitable K&N cleaning and maintenance products and then re-oiled. After cleaning and servicing, the filter can be reused instead of being replaced with another disposable filter. Suitable for Ford Mustang S197 4.0 V6 2005–2010 Ford Mustang GT 4.6 V8 2005–2009 Product features K&N part number 33-2298 washable and reusable replacement air filter multi-layer cotton filter media oiled filter media pre-oiled and ready to install direct replacement for the factory air filter designed for the original airbox no modifications to the airbox required no engine calibration changes required
The K&N 33-2431 replacement air filter is a washable and reusable high-flow air filter for various Ford Mustang S197 models from 2010–2014. It directly replaces the factory air filter inside the original airbox. The multi-layer K&N cotton filter media is oiled and designed to combine high airflow with effective filtration. The filter is supplied pre-oiled and ready to install. Direct replacement in the factory airbox The K&N 33-2431 is designed for the original intake system of the respective Mustang model. Simply remove the standard air filter from the factory airbox and replace it with the K&N filter. No modifications to the factory airbox or changes to the engine calibration are required for installation of the replacement filter. Washable and reusable Unlike a conventional disposable paper filter, the K&N air filter is designed for repeated use. When required, the filter media can be cleaned using suitable K&N cleaning and maintenance products and then re-oiled. After cleaning and servicing, the filter can be reused instead of being replaced with another disposable filter. Suitable for Ford Mustang GT 4.6 V8 – model year 2010 Ford Mustang 3.7 V6 – 2011–2014 Ford Mustang GT 5.0 V8 – 2011–2014 Ford Mustang Boss 302 5.0 V8 – 2012–2013 Product features K&N part number 33-2431 washable and reusable replacement air filter multi-layer cotton filter media oiled filter media pre-oiled and ready to install direct replacement for the factory air filter designed for the original airbox no modifications to the airbox required no engine calibration changes required
The K&N E-1993 replacement air filter is a washable and reusable high-flow air filter for the 2010–2014 Ford Mustang Shelby GT500. It directly replaces the factory air filter inside the original airbox. The multi-layer K&N cotton filter media is oiled and designed to combine high airflow with effective filtration. The filter is supplied pre-oiled and ready to install. Direct replacement in the factory airbox The K&N E-1993 is designed for the factory Shelby GT500 intake system. Simply remove the standard air filter from the original airbox and replace it with the K&N filter. No modifications to the factory airbox or changes to the engine calibration are required for installation of the replacement filter. Washable and reusable Unlike a conventional disposable paper filter, the K&N air filter is designed for repeated use. When required, the filter media can be cleaned using suitable K&N cleaning and maintenance products and then re-oiled. This allows the filter to be reused rather than replaced during every regular service cycle. Suitable for Ford Mustang Shelby GT500 2010–2012 5.4 V8 supercharged Ford Mustang Shelby GT500 2013–2014 5.8 V8 supercharged for the factory airbox Product features K&N part number E-1993 washable and reusable replacement air filter multi-layer cotton filter media oiled filter media pre-oiled and ready to install direct replacement for the factory air filter designed for the original airbox no modifications to the airbox required no engine calibration changes required