Schropp SF-550 Lowering Springs for Mustang 7 with MagneRide

Our Schropp SF-550 lowering springs are the ideal choice for anyone looking to give their Mustang 7 a sportier stance without replacing the factory MagneRide suspension. The springs are manufactured by Eibach specifically for Schropp and are designed to work with the Mustang's original dampers.

With approximately 25 mm lowering at the front and 20 mm at the rear, the Mustang gains a noticeably sportier stance. At the same time, the lower centre of gravity improves handling and reduces body movement during performance-oriented driving.

When developing our spring setup, however, simply making the car as low as possible was never the goal. The front and rear ride heights need to work visually together – which is why we chose our characteristic Schropp setup without excessive rear-end sag.

Balanced lowering without rear-end sag

Some lowering spring setups make the Mustang visually sit too low at the rear, losing its sporty stance. This is exactly what we wanted to avoid with our own springs.

The combination of approximately 25 mm lowering at the front and 20 mm at the rear provides a balanced and sporty ride height. The result is a noticeably improved appearance without making the Mustang unnecessarily low or visually rear-heavy.

Designed to work with the factory dampers

The SF-550 springs work extremely well with the factory MagneRide dampers. This retains the character of the adaptive suspension while the lower ride height provides a more direct and sporting vehicle response.

For drivers primarily looking for improved appearance combined with better handling, the SF-550 springs provide a highly effective solution without the need to replace the complete suspension with a coilover system.

Important information for MagneRide vehicles

After installing the lowering springs, the MagneRide system must be recalibrated. Due to the changed ride height, the ride-height sensors and MagneRide control system need to be adapted to the new vehicle height to ensure that the adaptive suspension continues to operate correctly.

Product features

• Schropp SF-550 lowering springs manufactured by Eibach
• Approx. 25 mm front / 20 mm rear lowering
• Sporty, balanced stance without excessive rear lowering
• Designed to work with the factory MagneRide dampers
• Improved handling through a lower centre of gravity
• Factory MagneRide system is retained
• MagneRide recalibration required after installation
• Suitable for Coupé and Convertible
• Supplied with German TÜV parts certificate

Vehicle applications

• Mustang 7 from model year 2024 with MagneRide
• 5.0 GT
• Dark Horse