Schropp Handling Pack for Mustang 7 with MagneRide

Our Schropp Handling Pack is one of our most popular Mustang suspension upgrades – and a setup we know extremely well from our own experience. It combines our Eibach lowering springs, manufactured specifically for Schropp, with adjustable Eibach anti-roll bars at the front and rear.

The aim is not to create an excessively stiff suspension, but a well-balanced overall package: less body roll, more precise turn-in and noticeably more control during quick changes of direction. At the same time, the factory MagneRide suspension is retained, allowing the adaptive dampers to continue doing their job.

We use this Handling Pack on our own Mustang 7 GT with MagneRide. The setup has also impressed us at the Hockenheimring: for us, our Gen 7 handles better and feels more balanced with this combination than our previous Mustang 6 pre-facelift equipped with a considerably more expensive coilover suspension.

Schropp springs without rear-end sag

A key feature of our springs is the deliberately balanced lowering. Many lowered Mustangs visually sit too low at the rear. This is exactly what we wanted to avoid when developing our own spring setup.

The springs are manufactured by Eibach specifically for Schropp and lower the Mustang by approximately 25 mm at the front and 20 mm at the rear. This gives the car a sportier stance while maintaining a balanced front-to-rear appearance.

Eibach anti-roll bars – 3-way adjustable

The springs are combined with the Eibach Anti-Roll Kit. The 35 mm tubular front anti-roll bar and 24.5 mm tubular rear anti-roll bar are both 3-way adjustable, allowing the handling balance to be tuned to the intended use, tyres and individual driving style.

The uprated anti-roll bars reduce body roll and give the Mustang a more precise and controlled feel, particularly through fast corners and quick changes of direction.

Important information for MagneRide vehicles

After installing the lowering springs, the MagneRide system must be recalibrated. Due to the changed ride height, the ride-height sensors and MagneRide control system need to be adapted to the new vehicle height to ensure that the adaptive suspension continues to operate correctly.

Product features

• Schropp lowering springs manufactured by Eibach
• Approx. 25 mm front / 20 mm rear lowering
• Balanced stance without excessive rear lowering
• Eibach 35 mm tubular front anti-roll bar, 3-way adjustable
• Eibach 24.5 mm tubular rear anti-roll bar, 3-way adjustable
• Reduced body roll and more precise handling
• Factory MagneRide system is retained
• MagneRide recalibration required after installation
• Road and track proven by Schropp
• Supplied with German TÜV parts certificate up to 300 km/h

Vehicle applications

• Mustang 7 from model year 2024 with MagneRide
• 5.0 GT
• Dark Horse