KW V1 Coilover Kit for Mustang 2005–2014

The KW V1 coilover kit 10230045 is designed for Mustang owners looking to combine sporty lowering with a complete spring and damper system specifically matched to the vehicle. KW supplies the V1 with vehicle-specific preset damping, so no additional rebound or compression adjustment is required.

This makes the V1 particularly suitable for a sporty road-driven Mustang where more direct handling and an individually adjustable ride height are desired without the need to configure adjustable dampers.

Vehicle-specific matched damping

The springs and dampers of the KW V1 are designed as a complete suspension system and matched specifically to the Mustang. The damping characteristics are factory preset and cannot be individually adjusted.

Drivers looking for additional adjustment of rebound and compression damping can step up to the KW V3. With the V1, the focus is on KW's predefined combination of sporty handling and everyday road usability.

Continuously adjustable ride height

The ride height can be individually adjusted within the tested adjustment range:

• Front axle: approx. 30–60 mm
• Rear axle: approx. 35–55 mm

At the front, ride height is adjusted via the threaded coilover struts. At the rear, separate springs with height adjusters are combined with matching dampers.

KW inox-line stainless steel technology

The KW V1 uses KW's proven inox-line stainless steel technology. The stainless steel struts and KW height adjustment system are designed for high corrosion resistance and reliable long-term adjustment of the vehicle's ride height.

Suitable for

• Ford Mustang S197 2005–2014
• Mustang 4.0 V6 2005–2010
• Mustang GT 4.6 V8 2005–2010
• Mustang 3.7 V6 2011–2014
• Mustang GT 5.0 V8 2011–2014
• Shelby GT500 5.4 V8
• Coupe and Convertible
• Maximum front axle load: 1,134 kg
• Maximum rear axle load: 1,100 kg

With Teilegutachten

The KW V1 is supplied with a Teilegutachten (§19.3). As the Mustang S197 was registered in Germany as an imported vehicle, the actual approval procedure may depend on the individual vehicle registration. Vehicles with an individual vehicle approval may require an inspection according to §19(2) StVZO.

If in doubt, please confirm the required approval procedure with your inspection authority before installation. All conditions and instructions stated in the supplied documentation must be observed during installation, adjustment and approval.

Scope of delivery and product features

• KW part number 10230045
• KW V1 Street Performance coilover suspension
• for Ford Mustang S197 2005–2014
• vehicle-specific factory preset damping
• no separate rebound or compression adjustment
• front lowering approx. 30–60 mm
• rear lowering approx. 35–55 mm
• height adjustable at front and rear
• front: threaded coilover struts
• rear: springs with height adjustment and dampers
• KW inox-line stainless steel technology
• front axle load up to 1,134 kg
• rear axle load up to 1,100 kg
• with Teilegutachten (§19.3)