Eibach Bilstein B12 Pro-Kit Suspension for Mustang 2010–2014

Eibach Bilstein B12 Pro-Kit suspension for the Ford Mustang 2010–2014 – a matched combination of Eibach lowering springs and Bilstein gas-pressure sport shock absorbers.

The B12 Pro-Kit combines Eibach Pro-Kit suspension springs with matched Bilstein sport shock absorbers. The complete suspension package provides a sportier ride height together with more direct and controlled handling compared with the standard suspension.

Lowering is approximately 25 mm at the front and 30 mm at the rear.

Eibach springs and Bilstein sport shock absorbers

• complete suspension package for front and rear axle
• Eibach Pro-Kit lowering springs
• Bilstein gas-pressure sport shock absorbers
• monotube damper design
• front lowering approx. 25 mm
• rear lowering approx. 30 mm
• maximum front axle load: 1,070 kg
• maximum rear axle load: 1,116 kg
• Teilegutachten for the Eibach suspension springs

Suitable for

• Ford Mustang 2010–2014
• Coupe and Convertible
• up to 1,070 kg permissible front axle load
• up to 1,116 kg permissible rear axle load

Matched sports suspension

The B12 Pro-Kit uses springs and shock absorbers as a matched suspension system. The lower ride height reduces the vehicle's centre of gravity, while the Bilstein sport shock absorbers provide controlled damping. This helps reduce body movement during acceleration, braking and cornering.

The B12 Pro-Kit is therefore designed for Mustang owners looking for a sportier suspension setup and a moderately lower stance without choosing an extreme lowering concept.

Installation and approval

A Teilegutachten is available for the Eibach suspension springs. As the Mustang S197 2005–2014 was registered in Germany as an imported vehicle, the required approval procedure depends on the individual vehicle registration. Vehicles with an individual vehicle approval may require an inspection according to §19(2) StVZO.

Please confirm the required approval procedure with your inspection authority before installation. All instructions and conditions stated in the Teilegutachten must be observed.

A wheel alignment must be carried out after installation and the headlamp adjustment must be checked.

Scope of delivery

• Eibach Pro-Kit suspension springs for front and rear axle
• Bilstein sport shock absorbers for front and rear axle
• Teilegutachten for the Eibach suspension springs

Eibach part number: E90-35-008-02-22