Mustang 6 2015-2017
Discover our tuning range for the Ford Mustang 6 from 2015 to 2017. From performance and suspension to styling and accessories, you'll find selected components here to upgrade your Mustang.
Choose your category
Barracuda Karizzma 20” Wheel Set for Mustang 5, 6 & 7 – Mattblack Puresports
The Barracuda Karizzma is a distinctive 20-inch wheel with a sporty design. In this combination selected by Schropp, it is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. We have been fitting the Karizzma to Mustangs in exactly this combination for years: 9x20 ET40 on the front axle and 10.5x20 ET40 on the rear axle. This gives the Mustang a noticeably more substantial wheel and tyre appearance with a wider rear setup, using a combination that is well proven on our Mustang builds. Wheel set Front axle: 2x Barracuda Karizzma – 9x20 – ET40 Rear axle: 2x Barracuda Karizzma – 10.5x20 – ET40 Bolt pattern: 5x114.3 Finish: Mattblack Puresports Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 All models within the respective Mustang generations Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Karizzma wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Racing Lug Nuts M14x1.5 – Set of 20, 74 mm
The Barracuda Racing Lug Nuts combine distinctive racing-inspired styling with a high-quality two-piece construction. The set contains 20 M14x1.5 conical-seat lug nuts and is suitable for Mustang 6 and Mustang 7 models when used with compatible alloy wheels. The 74 mm Racing Lug Nuts are available in a range of colours, allowing the appearance to be matched individually to the wheels and vehicle. Aluminium styling combined with high-strength steel The visible heads are manufactured from high-quality anodised aluminium, while the load-bearing components are made from high-strength grade 10.9 steel. This construction combines the characteristic Barracuda Racing appearance with a robust technical basis for road use. Suitable for many alloy wheels Barracuda Racing Lug Nuts can be used with many compatible alloy wheels regardless of wheel manufacturer, provided that the wheel has the correct conical seat and sufficient clearance. A minimum wheel bolt hole diameter of 25 mm is required. When installed, the Racing Lug Nuts must not protrude beyond the outer edge of the wheel. Compatibility therefore always depends on the individual wheel design, seat and available clearance. Special adapter and additional theft protection The lug nuts are installed and removed using the special Barracuda wheel adapter. The dedicated tool design also provides additional protection against simply removing the wheels with conventional tools. Product features Set of 20 Barracuda Racing Lug Nuts Thread: M14x1.5 Conical seat Length: 74 mm Suitable for Mustang 6 and Mustang 7 with compatible wheels Suitable for many alloy wheels from different manufacturers Minimum 25 mm wheel bolt hole diameter required Anodised aluminium heads High-strength grade 10.9 steel components Available in various colours Special adapter for installation and removal Approved for road vehicles without additional registration – confirmation supplied with the product Vehicle applications Mustang 6 pre-facelift 2015–2017 Mustang 6 Facelift 2018–2023 Mustang 7 from model year 2024 Important: Compatibility depends on the wheel being used. Thread size, conical seat, wheel bolt hole diameter and available clearance must be checked before installation. The Racing Lug Nuts must not protrude beyond the outer edge of the wheel. Wheel stud length: The existing wheel stud length must be checked before installation. Depending on the vehicle and wheel combination, the studs may be too long and may need to be professionally shortened. Note: Example images. The actual colour may vary slightly depending on the selected version and display.
Barracuda Ultralight Dragoon 20” Wheel Set for Mustang 6 & 7 – Bronze
Limited availability: The Barracuda Ultralight Dragoon is being discontinued by Barracuda and is now available only in limited quantities. Continued availability therefore cannot be guaranteed. The Barracuda Ultralight Dragoon combines a distinctive sporting design with an eye-catching bronze finish. In our Mustang setup, the Dragoon is fitted in 10x20 ET40 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using the same wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET40 setup is a combination selected and proven by us for the Mustang. Wheel set Front axle: 2x Barracuda Ultralight Dragoon – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Dragoon – 10x20 – ET40 Bolt pattern: 5x114.3 Finish: Bronze Supplied with German TÜV parts certificate (Teilegutachten) for Ford Mustang type LAE Vehicle applications Ford Mustang 6 – from model year 2015 Ford Mustang 7 – from model year 2024 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Dragoon wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten) for Ford Mustang type LAE. The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 2 20” Wheel Set for Mustang 5, 6 & 7
The Barracuda Ultralight Project 2 combines a sporty multi-spoke design with a low wheel weight. In our Mustang setup, it is fitted in 9x20 ET40 on the front axle and 10.5x20 ET40 on the rear axle and is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. We offer the Project 2 in two finishes: Silver Brushed and Gunmetal. The desired finish can be selected when ordering. The 9x20 front and 10.5x20 rear setup is a combination selected and proven by us for the Mustang. 5 mm wheel spacers are part of this setup on the front axle and are already included with the wheel set. Wheel set Front axle: 2x Barracuda Ultralight Project 2 – 9x20 – ET40 Front wheel weight: 11.8 kg per wheel Rear axle: 2x Barracuda Ultralight Project 2 – 10.5x20 – ET40 Rear wheel weight: 12.2 kg per wheel Bolt pattern: 5x114.3 Finishes: Silver Brushed or Gunmetal 5 mm front axle wheel spacers included Supplied with German TÜV parts certificate (Teilegutachten) Product image note: The vehicle images show the Barracuda Ultralight Project 2 in Gunmetal. Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 All models within the respective Mustang generations Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 2 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 3.0 20” Wheel Set for Mustang – Flash Colours
The Barracuda Ultralight Project 3.0 is anything but an ordinary black wheel. Its gloss black finish is combined with machined spoke contours in striking Flash colours. Especially in direct sunlight, the coloured details create an eye-catching effect that emphasises the wheel design. In our Mustang setup, the Project 3.0 is fitted in 10x20 ET40 on all four corners, creating a sporty and balanced wheel and tyre appearance with identical wheel dimensions on the front and rear axles. Wheel set Front axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Bolt pattern: 5x114.3 Weight: 12.6 kg per wheel Base finish: Gloss Black Machined spoke contours in the selected Flash colour Supplied with German TÜV parts certificate (Teilegutachten) Flash colours Flash Red Flash Blue Flash Gold Flash Green Flash Copper Flash Orange The intensity of the machined coloured contours changes depending on the light. In direct sunlight in particular, the Flash colours become a real highlight. Vehicle applications Ford Mustang 6 Ford Mustang 7 Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 3.0 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Barracuda Ultralight Project 3.0 20” Wheel Set for Mustang 6 & 7 – Matt Black
The Barracuda Ultralight Project 3.0 combines a sporty multi-spoke design with a distinctive matt black finish and machined spoke contours. In our Mustang setup, it is fitted in 10x20 ET40 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using identical wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET40 setup is a combination selected and proven by us for the Mustang. Wheel set Front axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Rear axle: 2x Barracuda Ultralight Project 3.0 – 10x20 – ET40 Bolt pattern: 5x114.3 Weight: 12.6 kg per wheel Finish: Matt Black with machined spoke contours Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 6 Ford Mustang 7 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Barracuda Ultralight Project 3.0 wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
BMR 2-Point Chassis Brace CB007 for Mustang 2015–2023 – Black Hammertone
The BMR CB007 2-Point Chassis Brace reinforces the front K-member of the 2015–2023 Ford Mustang and reduces deflection under high longitudinal and lateral loads. The result is a more direct connection between the suspension and chassis, providing more precise steering feel and improved stability. The brace connects the rear sections of the front K-member, reinforcing an area that is subjected to particularly high loads during hard braking and cornering. Schropp experience – track proven in our SF600R We used this BMR Chassis Brace for many years on our Schropp SF600R, both on the road and on the race track. Particularly on a high-performance Mustang, reinforcing the front chassis structure provides a useful addition to the suspension setup. We especially recommend combining it with our Schropp strut tower brace. While the strut tower brace connects the upper section of the front chassis structure, the BMR Chassis Brace reinforces the K-member from underneath. Together, they provide effective chassis reinforcement and make the Mustang feel more direct and precise in response to steering inputs. Heavy-duty steel construction The CB007 is manufactured from heavy-duty 1 × 1.5-inch rectangular tubing and CNC-formed, laser-cut 3/16-inch steel plate. The construction is specifically designed to provide additional support for the factory Mustang K-member. The Black Hammertone finish is a dark grey to black textured powder coating that provides durable protection for the steel construction. 100% bolt-on installation The Chassis Brace installs using existing mounting points. No drilling or welding is required. The required installation hardware is included. BMR specifies an installation time of less than one hour. Vehicle applications 2015–2023 Ford Mustang Mustang GT 5.0 V8 Mustang EcoBoost 2.3 Mustang Bullitt Mustang Mach 1 Not compatible with Mustang V6 Mustang Shelby GT350 / GT350R V8 applications equipped with Kooks Long Tube Headers Vehicles equipped with a Moroso road-race oil pan Product features BMR part number CB007BH 2-point reinforcement of the front K-member Reduces K-member deflection under load More direct steering feel and improved stability Heavy-duty steel construction Black Hammertone powder-coated finish 100% bolt-on installation using existing mounting points No drilling or welding required Installation hardware included Made in the USA
BMR Driveshaft Safety Loop DSL017 for Mustang 2011–2026 – Black Hammertone
The BMR DSL017 Driveshaft Safety Loop is a heavy-duty safety restraint for the Ford Mustang driveshaft. Installed around the front section of the driveshaft, it is designed to help contain the driveshaft in this area underneath the vehicle in the event of a failure. The Safety Loop does not alter the operation of the driveshaft and is not a suspension or performance modification. Its purpose is to provide an additional level of protection in the event that a driveshaft or its connection fails under high load. What does a Driveshaft Safety Loop do? At high vehicle speeds, the driveshaft rotates at correspondingly high speed. In the unlikely event that it becomes disconnected or fails while driving, an uncontrolled driveshaft underneath the vehicle can potentially cause significant secondary damage. The BMR Safety Loop surrounds the front section of the driveshaft. In the event of a failure, it is designed to help contain the driveshaft in this area underneath the vehicle and thereby reduce the risk of additional damage. Additional protection at high speeds For a Mustang that is regularly driven at high speeds, a Driveshaft Safety Loop can provide a useful additional mechanical safeguard. On 2015 and later Mustang models, the factory driveshafts are already designed for the higher vehicle speeds these models can achieve. The Safety Loop is therefore not a prerequisite for higher-speed driving on these vehicles, but it can be installed as an additional mechanical safety measure. Particularly relevant for 2011–2014 Mustangs On 2011–2014 Mustang models, this becomes particularly relevant when the factory speed limiter is removed. Especially on V6 models, it should be taken into account that the factory driveshaft was not designed for unrestricted increases in vehicle speed. A Safety Loop does not make an unsuitable driveshaft safe for higher speeds and does not replace any necessary driveshaft upgrade. It does, however, provide an additional safeguard for the worst-case scenario if the driveshaft or one of its connections should fail. Heavy-duty bolt-on construction The DSL017 is manufactured from 0.25-inch laser-cut steel plate and attaches to the factory transmission crossmember. Its fully bolt-on design requires no welding. High-strength Grade 8 mounting hardware is included. BMR specifies an installation time of approximately one hour. Vehicle applications 2011–2014 Ford Mustang 2015–2023 Ford Mustang 2024 and later Ford Mustang Suitable for various engines and model variants Compatible with MGW shifters Product features BMR part number DSL017 Additional driveshaft safety restraint Can help reduce the risk of secondary damage in the event of a driveshaft failure 0.25-inch laser-cut steel construction Black Hammertone finish Attaches to the factory transmission crossmember 100% bolt-on installation Grade 8 mounting hardware included No welding required Made in the USA
Corspeed DeVille 21” Wheel Set for Mustang 5, 6 & 7 - Gunmetal
The Corspeed DeVille combines a distinctive sporting design with the striking appearance of a 21-inch wheel. In our Mustang setup, it is fitted in 9x21 ET40 on the front axle and 10.5x21 ET40 on the rear axle and is suitable for Ford Mustang 5, Mustang 6 and Mustang 7. The wider rear wheels emphasise the powerful proportions of the Mustang, while the 9x21 front wheels create a balanced and sporty overall appearance. This is a combination selected and proven by us for the Mustang. The Corspeed DeVille is available from us in Matt Gunmetal. Wheel set Front axle: 2x Corspeed DeVille – 9x21 – ET40 Rear axle: 2x Corspeed DeVille – 10.5x21 – ET40 Bolt pattern: 5x114.3 Finish: Matt Gunmetal Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 5 Ford Mustang 6 Ford Mustang 7 Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your 21-inch Corspeed DeVille wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
Corspeed Kharma 20” Wheel Set for Mustang 6 & 7 - Silver
The Corspeed Kharma combines a distinctive sporting design with wheel dimensions particularly well suited to the Mustang. In our setup, it is fitted in 10x20 ET35 on all four corners and is suitable for Ford Mustang 6 and Mustang 7. Using identical wheel dimensions on the front and rear axles creates a balanced and sporty wheel and tyre appearance. The 10x20 ET35 setup is a combination selected and proven by us for the Mustang. The Corspeed Kharma is available from us in Silver Brushed. Wheel set Front axle: 2x Corspeed Kharma – 10x20 – ET35 Rear axle: 2x Corspeed Kharma – 10x20 – ET35 Bolt pattern: 5x114.3 Finish: Silver Brushed Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Ford Mustang 6 Ford Mustang 7 Ford Mustang type LAE Tyre pressure sensors (TPMS) Compatible tyre pressure sensors for European-specification Ford Mustang models (Mustang 6 & 7) are available separately in our online shop. US-specification vehicles may require different sensors depending on the vehicle. Please contact us by email with your vehicle details before ordering so that we can check the appropriate version. Complete wheel and tyre package Would you like your Corspeed Kharma wheels supplied as a fully assembled wheel and tyre package? We will be happy to prepare an individual quotation with your preferred tyres. Our clear recommendation for the Ford Mustang is the Michelin Pilot Sport 4 S. Its balanced combination of grip, driving stability and everyday usability makes it our preferred tyre choice for high-performance Mustang models. We can of course also supply a complete wheel and tyre package with tyres from other manufacturers. As tyre prices and availability change frequently, complete packages are offered on request. Simply send us an email with your vehicle model, model year and preferred tyre manufacturer or tyre requirements. Approval information The wheel set is supplied with a German TÜV parts certificate (Teilegutachten). The requirements and notes specified in the certificate as well as the selected wheel and tyre combination must be observed.
CTEK Comfort Connect Eyelet M8 – Battery Quick Connect Lead, 40 cm
With the CTEK Comfort Connect Eyelet M8, connecting your CTEK battery charger becomes quick and convenient. This practical connection lead is designed to remain permanently attached to your vehicle's battery, providing an easy charging connection without having to attach battery clamps every time. An ideal accessory for your Ford Mustang, especially if it is used as a seasonal vehicle or stored in the garage during the winter months. Install Once, Connect Whenever Needed The two M8 ring terminals with an 8.4mm internal diameter are attached directly to suitable battery connections. The 40cm cable features a CTEK Comfort Connect quick connector that can be positioned in a convenient, accessible location. Whenever charging or battery maintenance is required, simply plug your compatible CTEK charger into the quick connector. There is no need to repeatedly disconnect battery terminals or attach charging clamps. Perfect for Mustang Winter Storage Regular battery maintenance is especially important for vehicles that remain unused for extended periods. The Comfort Connect Eyelet M8 makes connecting your CTEK charger quick and hassle-free whenever your battery needs attention. Combined with the CTEK MXS 5.0, it provides a convenient solution for battery charging and automatic maintenance charging throughout the winter months. Key Features and Benefits Permanent battery connection for convenient charging and maintenance CTEK Comfort Connect quick connector for easy charger connection M8 ring terminals with an 8.4mm internal diameter 40cm cable length for compact, space-saving installation Compatible with suitable CTEK chargers up to 10A Splash-proof and dust-proof design Ideal for seasonal vehicles, classic cars and winter storage 2-year manufacturer's warranty according to CTEK Technical Specifications Manufacturer: CTEK Product: Comfort Connect Eyelet M8 Manufacturer Part Number: 56-261 Cable length: 0.4m / 40cm Battery connection: M8 ring terminals, 8.4mm internal diameter Maximum charging current: 10A Charger connector: CTEK Comfort Connect Design: Permanent battery connection lead What's Included 1 x CTEK Comfort Connect Eyelet M8 connection lead, 40cm Important Information The Comfort Connect Eyelet M8 is a battery connection lead, not a standalone battery charger. A compatible CTEK battery charger is required and sold separately. Before ordering, please make sure the M8 ring terminals are suitable for your vehicle's battery connections. Always observe correct polarity and follow the vehicle manufacturer's instructions during installation. The Comfort Connect Eyelet does not feature an integrated LED battery status indicator. For convenient battery status monitoring, we recommend the separately available CTEK Comfort Indicator Panel. Our recommendation: Pair the Comfort Connect Eyelet M8 with the CTEK MXS 5.0. A permanently installed quick connector makes regular battery maintenance particularly convenient for Mustangs stored over winter.
CTEK Comfort Indicator Panel M8 – Battery Status Indicator & Charging Connector, 1.5 m
With the CTEK Comfort Indicator Panel M8, you can easily keep an eye on your Mustang's battery condition while enjoying convenient access to a charging connection for your CTEK battery charger. The permanently mounted LED indicator uses a simple traffic light system to show when your battery needs charging. Ideal for Ford Mustangs of all generations, especially seasonal vehicles, classic cars and Mustangs stored during the winter months. A compatible 12V lead-acid battery is required. Battery Status at a Glance The integrated LED indicator uses three colours to show the battery's voltage status: Green – OK: Battery voltage above 12.65V. No charging required at present. Yellow – Charging recommended: Battery voltage between 12.4V and 12.65V. The battery should be recharged soon. Red – Charge now: Battery voltage below 12.4V. The battery needs charging. The indicator provides a convenient voltage-based indication of battery condition but does not replace a comprehensive battery health test. Install Once, Charge Conveniently The CTEK Comfort Indicator Panel connects permanently to your vehicle's battery. The M8 ring terminals with an 8.4mm internal diameter attach to the appropriate battery terminals. Its 1.5m cable allows the indicator panel to be mounted in a convenient, accessible location. Whenever charging is required, simply connect your compatible CTEK charger to the integrated CTEK Comfort Connect connector. There is no need to reconnect battery clamps every time you want to charge your battery. Perfect for Mustang Winter Storage If your Mustang spends the winter in the garage, keeping its battery in good condition is essential. During extended periods of inactivity, a vehicle battery can gradually lose charge, potentially leaving your car unable to start when the driving season returns. With the Comfort Indicator Panel, you can easily check the battery status and connect your CTEK charger whenever needed. Paired with the CTEK MXS 5.0, it provides a practical solution for regular battery care and maintenance charging. Key Features and Benefits LED battery status indicator with green, yellow and red signals Integrated charging connector for compatible CTEK chargers Permanent battery connection using M8 ring terminals 1.5m cable length for flexible positioning Suitable for 12V lead-acid batteries Compatible with CTEK chargers up to 10A using the appropriate CONNECT system Ideal for seasonal vehicles, classic cars and winter storage 2-year manufacturer's warranty according to CTEK Technical Specifications Manufacturer: CTEK Product: Comfort Indicator Panel M8 Manufacturer Part Number: 56-380 EAN: 7350009563802 Battery voltage: 12V Battery type: Lead-acid Cable length: 1.5m Battery connection: M8 ring terminals, 8.4mm internal diameter Maximum charging current through connector: 10A Indicator: 3-stage LED battery status display Charger connector: CTEK Comfort Connect What's Included 1 x CTEK Comfort Indicator Panel M8 with 1.5m connection cable and ring terminals Important Information The Comfort Indicator Panel is a battery status indicator with an integrated charging connection, not a standalone battery charger. A compatible CTEK battery charger is required and sold separately. Suitable for compatible 12V lead-acid batteries only. Not compatible with lithium batteries. Installation requires a suitable mounting location. Follow the vehicle manufacturer's instructions when connecting accessories to the battery. Our recommendation: Pair the Comfort Indicator Panel with the CTEK MXS 5.0. It makes checking your Mustang's battery status and connecting your charger quick and convenient – especially during winter storage.
CTEK MXS 5.0 – 12V Battery Charger & Maintainer
Your Mustang may be taking a winter break, but its battery doesn't have to! With the CTEK MXS 5.0, your Ford Mustang's battery stays properly maintained even during extended periods of storage. This fully automatic 12V battery charger with intelligent maintenance charging is the ideal solution for seasonal vehicles, classic cars and Mustangs that are not driven every day. Whether you own a first-generation Mustang, Foxbody, SN95, S197, S550 or the latest S650, the CTEK MXS 5.0 is suitable for all Ford Mustang generations equipped with a compatible 12V lead-acid battery. Simply connect the charger, select the appropriate programme and let it take care of the rest. Perfect for Winter Storage Vehicle batteries can gradually discharge during extended periods of inactivity. The CTEK MXS 5.0 charges the battery as needed and automatically switches to maintenance charging once charging is complete. This helps keep your battery in good condition throughout the winter and ready for the next driving season. Intelligent 8-Step Charging Technology The CTEK MXS 5.0 uses a fully automatic 8-step charging process. It checks the battery's condition, adapts the charging process and provides gentle, effective battery care. Integrated temperature compensation optimises charging under different ambient conditions. Key Features and Benefits 5A charging output for reliable charging of 12V batteries Automatic maintenance charging – ideal for long-term storage and seasonal vehicles 8-step charging technology for intelligent and gentle battery care AGM programme for compatible AGM batteries RECOND function for reconditioning suitable deeply discharged lead-acid batteries Temperature compensation for optimised charging performance Fully automatic operation – no manual switching to maintenance mode required Suitable for classic and modern Mustangs with compatible 12V batteries 5-year manufacturer's warranty according to the manufacturer Four Charging Programmes Small Battery: 0.8A charging programme for smaller 12V batteries Normal: 5A charging programme for conventional 12V vehicle batteries AGM: Dedicated charging programme for AGM batteries RECOND: Reconditioning programme for suitable lead-acid batteries Technical Specifications Manufacturer: CTEK Model: MXS 5.0 Battery voltage: 12V Maximum charging current: 5A Charging voltage: 14.4V / 14.7V / 15.8V (depending on programme) Battery capacity: 1.2–110Ah Supported battery types: WET, MF, Ca/Ca, AGM, GEL and EFB Charging process: Fully automatic, 8-step Input voltage: 220–240V AC, 50–60Hz What's Included 1 x CTEK MXS 5.0 battery charger Battery connection clamps (Connect Clamps) Important Information Suitable for compatible 12V lead-acid batteries. Not intended for 6V or lithium batteries. For vehicles with specific battery or battery management systems, follow the vehicle manufacturer's instructions. Only use the RECOND programme with suitable batteries. Our recommendation: If your Mustang spends the winter in the garage, an intelligent battery maintainer is one of the easiest ways to care for its battery and avoid unpleasant surprises when it's time for the first drive of spring.
Datalogging & Tune Revisions – Add-On Service for SCT X4 / BDX Custom Tunes
Our optional Datalogging & Tune Revisions Service enhances your Schropp Custom Tune with individual datalog analysis and tune adjustments where required. This allows us to evaluate your vehicle's operating data remotely and further optimise the remote tuning process. This service is exclusively available to customers who have purchased a Schropp Custom Tune for the SCT X4 or SCT BDX directly from us. What's Included? Custom Datalog Configuration: We create a dedicated datalogging configuration for your SCT X4 or SCT BDX, tailored to your vehicle and Custom Tune. Datalog Analysis: You record the requested vehicle data using your SCT device and send us the files for evaluation. Up to Two Tune Revisions: We review the recorded data and provide up to two revised versions of your Custom Tune where necessary. Remote Tuning: Datalog analysis allows us to assess relevant operating parameters and make appropriate tune adjustments without requiring a visit to our workshop. How It Works Purchase this add-on service for your SCT X4 or SCT BDX Custom Tune purchased from Schropp Fahrzeugtechnik. We provide the appropriate datalogging configuration and the necessary instructions. You record the requested datalogs using your SCT device and send us the files. We analyse the recorded data and provide an updated tune file if adjustments are required. If necessary, a second tune revision can be carried out based on additional datalogs. Validity and Scope of Service The Datalogging & Tune Revisions Service is valid for 30 days from the date the original tune file is sent. A maximum of two tune revisions are included within this period. Revisions are performed based on the submitted datalogs and only where technically necessary and feasible within the scope of the originally agreed Custom Tune. Unlimited tune revisions are not included. The service ends when the 30-day period expires or when the second tune revision has been completed, whichever occurs first. Unused revisions cannot be carried over to a later date. Technical Requirements SCT X4 or SCT BDX tuning device Windows laptop with internet access for the required SCT software and datalog transfer A compatible Custom Tune purchased directly from Schropp Fahrzeugtechnik Ability to record the requested datalogs according to our instructions Important: A Windows laptop is required to complete the datalogging process. A smartphone, tablet or Mac without a suitable Windows environment is not sufficient. Important Information This product is an optional add-on service exclusively for existing or simultaneously purchased Schropp Custom Tunes and can only be used with an SCT X4 or SCT BDX device. The SCT tuning device and the Custom Tune itself are not included in the price of this add-on service. They must have been purchased separately from us or ordered together with this service. Accurate analysis depends on suitable and complete datalog recordings. Changes to vehicle hardware or additional tuning requests beyond the scope of the originally agreed Custom Tune are not included. Our Recommendation: Particularly for vehicles with individual modifications, datalogging provides valuable additional information to help fine-tune your Custom Tune – conveniently through our remote tuning service.
Eibach 18mm Black Wheel Spacers incl. Black Shank Nuts / Set per Axle
Eibach Pro-Spacer System 6 wheel spacers in black. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
Eibach 18mm Silver Wheel Spacers incl. Black Shank Nuts / Set per Axle
Eibach Pro-Spacer System 6 wheel spacers in silver. Suitable for Ford Mustang from model year 2015, including Mustang Type LAE from model year 2018 and Mustang Gen 7 from model year 2024. The Eibach Pro-Spacer wheel spacers provide a wider track and give the Mustang a more balanced appearance. The wheels are positioned 9 mm further out on each side, resulting in a total track widening of 18 mm per axle. The set is designed for one axle and includes black shank nuts. Two sets are required for installation on both the front and rear axle. 9 mm per side / 18 mm per axle. Includes parts certificate (Teilegutachten).
Eibach Anti-Roll Kit Sway Bars for Mustang 6 + Mustang 7
For us, the Eibach Anti-Roll Kit is one of the most effective suspension upgrades available for the Mustang. The uprated anti-roll bars reduce body roll and give the car a more precise and controlled feel, particularly through fast corners and quick changes of direction – without having to replace the complete suspension. This is not a product we only know from a catalogue. At Schropp, we have installed these Eibach anti-roll bars on numerous Mustangs and use them on our own cars as well. They can be found on our SF600R, our Mustang Gen 7 and even on the OVR Racing Mustang built for the Nürburgring 24-hour race. From road cars to serious track use, this wide range of applications is one of the reasons why we rate this setup so highly. Less body roll, more precise handling During fast cornering, wheel load is transferred between the inside and outside of the car. The stiffer Eibach anti-roll bars counteract the resulting body roll, helping the Mustang feel more stable during changes of direction and respond more precisely to steering inputs. The kit consists of a 35 mm tubular front anti-roll bar and a 24.5 mm tubular rear anti-roll bar. Both bars are 3-way adjustable, allowing their effect to be matched to the vehicle setup, tyres and individual driving style. 3-way adjustable The different mounting positions allow the effective stiffness of the anti-roll bars to be changed. This also makes it possible to influence the handling balance between the front and rear axle. Depending on the chosen settings, the car can be tuned towards a more neutral balance or its tendency towards understeer or oversteer can be altered. For a good starting point, we recommend a balanced base setting. Any further adjustment should always take the complete vehicle setup, tyres and intended use into account. Product features Eibach Anti-Roll Kit for front and rear axle Front: 35 mm tubular anti-roll bar, 3-way adjustable Rear: 24.5 mm tubular anti-roll bar, 3-way adjustable Reduces body roll during cornering More direct and precise handling through corners and quick direction changes Adjustable front and rear bars allow the handling balance to be fine-tuned Suitable for performance-oriented road and track-focused vehicle setups Supplied with German TÜV parts certificate (Teilegutachten) Vehicle applications Mustang 7 from model year 2024: 5.0 GT and Dark Horse Mustang 6 Facelift from model year 2018: 2.3 EcoBoost, 5.0 GT, Bullitt and Mach 1 Mustang 6 pre-facelift 2015–2017: 2.3 EcoBoost, 5.0 GT and 3.7 V6
Eibach Bilstein B12 Pro-Kit Suspension for Mustang GT 2015–2017
The Eibach Bilstein B12 Pro-Kit E90-35-029-03-22 is a complete matched performance suspension system for the 2015–2017 Ford Mustang GT 5.0. It combines Eibach performance springs with Bilstein gas-pressure shock absorbers, providing a straightforward alternative to a height-adjustable coilover suspension. The springs and dampers are designed to work together as a complete system. The result is a sportier suspension setup with more direct handling and better-controlled body movement, without the need to individually adjust ride height or damping after installation. Eibach and Bilstein – matched as a complete system The B12 Pro-Kit combines two well-established names in suspension technology: Eibach supplies the performance springs while Bilstein provides the matching shock absorbers. The Bilstein dampers use gas-pressure and monotube technology. Combined with the Eibach springs, they form a complete spring and damper package with components specifically matched to work together. Sporty lowering without coilover adjustment The B12 Pro-Kit provides a moderate reduction in ride height compared with the factory suspension: Front axle: approx. 25 mm Rear axle: approx. 20 mm The predefined lowering is ideal for drivers looking for a sportier appearance and suspension setup without requiring individually adjustable ride height. Performance suspension developed for road use The B12 Pro-Kit is more than a set of lowering springs. By replacing both springs and shock absorbers, it creates a complete performance suspension system in which the damper characteristics are matched to the lowering springs. This makes the B12 an attractive solution for Mustang GT drivers looking for a classic, fixed performance suspension setup: install the complete system and benefit from a predefined ride height and damper setup without additional height or damping adjustment. Vehicle applications 2015–2017 Ford Mustang 6 Mustang GT 5.0 V8 Coupe and Convertible Maximum front axle load: 1105 kg Please check before ordering: The B12 Pro-Kit is intended for the Mustang GT 5.0 V8. The front axle load stated in the vehicle documents must not exceed 1105 kg. Supplied with German approval documentation The Eibach B12 Pro-Kit is supplied with German approval documentation (Gutachten). The listed vehicle applications, requirements and instructions must be observed during installation and any required inspection. Scope of delivery and product features Eibach part number E90-35-029-03-22 Eibach Bilstein B12 Pro-Kit performance suspension For 2015–2017 Mustang GT 5.0 V8 Complete spring and damper system Eibach performance springs Bilstein gas-pressure shock absorbers Monotube damper design Fixed matched damping characteristics Front lowering approx. 25 mm Rear lowering approx. 20 mm No ride-height adjustment required Front axle load up to 1105 kg Supplied with German approval documentation
Eibach Pro-Kit Lowering Springs for Mustang EcoBoost 2015–2021 – Non-MagneRide
The Eibach Pro-Kit E10-35-029-01-22 is Eibach's classic lowering spring set for the Ford Mustang EcoBoost. With a lowering of approximately 20–25 mm at the front and rear, it gives the Mustang a sportier ride height without creating an excessively lowered stance. The springs are designed for vehicles without MagneRide and are supplied with a German approval document. Sportier setup for the Mustang EcoBoost The moderate reduction in ride height lowers the vehicle's centre of gravity and reduces body movement, providing a more direct driving feel while also creating a more balanced appearance with less space between the tyres and wheel arches. The Eibach Pro-Kit is designed for use with the factory shock absorbers, making it particularly suitable for drivers looking for moderate lowering and a sportier setup without replacing the complete suspension system. Lowering Front axle: approx. 20–25 mm Rear axle: approx. 20–25 mm Vehicle applications Ford Mustang EcoBoost 2.3 Model years 2015–2021 Vehicles without MagneRide only Maximum front axle load: 1035 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1035 kg at the front and 1150 kg at the rear. Not suitable for vehicles equipped with MagneRide. Supplied with approval document The spring set is supplied with a German approval document. All requirements and instructions specified in the document must be observed during installation and approval. Product features Eibach part number E10-35-029-01-22 Eibach Pro-Kit lowering springs Specifically for Mustang EcoBoost Front lowering approx. 20–25 mm Rear lowering approx. 20–25 mm For vehicles without MagneRide Front axle load up to 1035 kg Rear axle load up to 1150 kg Supplied with German approval document
Eibach Pro-Kit Lowering Springs for Mustang EcoBoost 2018–2021 – with MagneRide
The Eibach Pro-Kit E10-35-045-01-22 is the Eibach lowering spring set for the Ford Mustang EcoBoost equipped with MagneRide. With a lowering of approximately 20 mm at the front and rear, it gives the Mustang a sportier ride height without creating an excessively lowered stance. The springs are specifically designed for vehicles with electronically controlled dampers and MagneRide and are supplied with a German approval document. Sportier setup for the Mustang EcoBoost The moderate reduction in ride height lowers the vehicle's centre of gravity and reduces body movement, providing a more direct driving feel while also creating a more balanced appearance with less space between the tyres and wheel arches. The Eibach Pro-Kit is designed for use with the factory MagneRide dampers, making it suitable for drivers who want to retain the adaptive factory suspension while moderately lowering their Mustang. Lowering Front axle: approx. 20 mm Rear axle: approx. 20 mm Vehicle applications Ford Mustang EcoBoost 2.3 Model years 2018–2021 Vehicles with MagneRide Maximum front axle load: 1035 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1035 kg at the front and 1150 kg at the rear. Important information for MagneRide vehicles After installing the lowering springs, the MagneRide system must be recalibrated. Due to the changed ride height, the ride-height sensors and MagneRide control system need to be adapted to the new vehicle height to ensure that the adaptive suspension continues to operate correctly. Supplied with approval document The spring set is supplied with a German approval document. All requirements and instructions specified in the document must be observed during installation and approval. Product features Eibach part number E10-35-045-01-22 Eibach Pro-Kit lowering springs Specifically for Mustang EcoBoost with MagneRide Front lowering approx. 20 mm Rear lowering approx. 20 mm For vehicles with electronically controlled dampers MagneRide recalibration required after installation Front axle load up to 1035 kg Rear axle load up to 1150 kg Supplied with German approval document
Eibach Pro-Spacer 30 mm Wheel Spacers Black for Mustang 2015–2023
The Eibach Pro-Spacer S90-6-15-056-B gives your Ford Mustang a wider, more purposeful stance by positioning the wheels further out in the wheel arches. The system increases the track width by 15 mm per side or 30 mm per axle. The wheel spacers feature a black anodised finish and are suitable for both the front and rear axle of the 2015–2023 Ford Mustang (type LAE). 15 mm per side / 30 mm per axle Manufacturer: Eibach Product line: Pro-Spacer System 6 Eibach part number: S90-6-15-056-B Thickness: 15 mm per side Track increase: 30 mm per axle Finish: Black Installation: with extended wheel studs Approval document: included Installation With this system, the original Mustang wheel studs are replaced by the extended wheel studs supplied with the kit. The spacers are then installed between the wheel hub and wheel. Please note: One set is intended for one axle. If you want to install the spacers on both the front and rear axle, you will need two sets. Vehicle application Ford Mustang type LAE model years 2015–2023 front axle rear axle Note: The product image shown is an example image.
Eibach Pro-Spacer 40 mm Wheel Spacers Black for Mustang 2015–2023
The Eibach Pro-Spacer S90-4-20-044-B gives your Ford Mustang a wider, more purposeful stance by positioning the wheels further out in the wheel arches. The system increases the track width by 20 mm per side or 40 mm per axle. The wheel spacers feature a black anodised finish and are suitable for both the front and rear axle of the 2015–2023 Ford Mustang (type LAE). 20 mm per side / 40 mm per axle Manufacturer: Eibach Product line: Pro-Spacer System 4 Eibach part number: S90-4-20-044-B Thickness: 20 mm per side Track increase: 40 mm per axle Finish: Black Approval document: included Installation With the Pro-Spacer System 4, the wheel spacers are mounted to the wheel hub. The factory wheel studs may extend beyond the surface of the installed spacer. Important – check your wheels before ordering: Installation is only possible with wheels that have suitable pockets or recesses on the rear. These recesses must be deep enough to accommodate the remaining length of the factory wheel studs protruding beyond the installed spacer. If the recesses are not deep enough, the factory wheel studs must be shortened accordingly for installation. Please note: One set is intended for one axle. If you want to install the spacers on both the front and rear axle, you will need two sets. Vehicle application Ford Mustang type LAE model years 2015–2023 front axle rear axle Note: The product image shown is an example image.
Eibach Pro-Spacer 50 mm Black Wheel Spacers for Mustang 2015–2017
The Eibach Pro-Spacer System 4 wheel spacers increase the track width of your Ford Mustang by 25 mm per side / 50 mm per axle. The black spacers provide a wider wheel stance and a more purposeful appearance. Suitable for the Ford Mustang type LAE, model years 2015–2017. 25 mm per side / 50 mm per axle One set is intended for one axle. If you want to install the spacers on both the front and rear axle, two sets are required. System 4 – check wheel pockets Important before installation: Installation is only possible with wheels that have suitable pockets on the rear face. These pockets must be deeper than the remaining length of the original wheel studs protruding beyond the spacer after installation. If the wheel pockets are not sufficiently deep, the wheel studs must be shortened accordingly. Product details Eibach Pro-Spacer System 4 25 mm track increase per side 50 mm track increase per axle black finish for Ford Mustang type LAE 2015–2017 one set for one axle supplied with Gutachten Example image.
Eibach Pro-Street-S Coilover Suspension for Mustang 2015–2017
The Eibach Pro-Street-S coilover suspension PSS65-35-029-01-22 combines sporty suspension tuning with individually adjustable ride height. This complete spring and damper system was developed for the 2015–2017 Ford Mustang and offers a balanced combination of handling performance, everyday usability and sporty appearance. Unlike lowering springs alone, the Pro-Street-S also replaces the factory shock absorbers. Springs and dampers are specifically matched to each other, providing improved handling characteristics together with individually adjustable ride height. Sporty handling with balanced comfort The Eibach Pro-Street-S is designed for Mustang drivers looking for a sportier driving experience and more direct suspension feedback without sacrificing everyday usability. The combination of matched performance dampers and suspension springs helps control vehicle movement and can reduce body roll during cornering as well as pitching under braking and acceleration. Continuous ride-height adjustment Ride height can be individually adjusted within the specified adjustment range: Front axle: approx. 30–50 mm Rear axle: approx. 20–40 mm This allows the lowering to be tailored to the desired appearance and the requirements of the vehicle. At the front, ride height is adjusted through threaded coilover struts. At the rear, separate springs with height adjusters and matching dampers are used. High-quality materials The Pro-Street-S uses stainless-steel damper technology and corrosion-resistant spring perches made from polyamide composite material. This construction supports reliable long-term ride-height adjustment and is designed for everyday use in varying weather conditions. Vehicle applications 2015–2017 Ford Mustang 6 Mustang 2.3 EcoBoost Mustang GT 5.0 V8 Coupe and Convertible Maximum front axle load: 1075 kg Maximum rear axle load: 1150 kg Please check before ordering: The axle loads stated in the vehicle documents must not exceed 1075 kg at the front and 1150 kg at the rear. This suspension is intended exclusively for the pre-facelift Mustang 6 and is not suitable for facelift models from model year 2018 onwards. Supplied with German approval documentation The Eibach Pro-Street-S is supplied with German approval documentation (Gutachten). All requirements and instructions specified in the documentation must be observed during installation, adjustment and any required inspection. Scope of delivery and product features Eibach part number PSS65-35-029-01-22 Eibach Pro-Street-S coilover suspension Complete spring and damper system for front and rear axles For 2015–2017 Mustang 6 Suitable for 2.3 EcoBoost and 5.0 GT Sport-tuned dampers Individually adjustable ride height Front lowering approx. 30–50 mm Rear lowering approx. 20–40 mm Front: threaded coilover struts Rear: separate springs with height adjusters and dampers Stainless-steel damper technology Corrosion-resistant polyamide composite spring perches Front axle load up to 1075 kg Rear axle load up to 1150 kg Supplied with German approval documentation