Schropp Handling Pack for Mustang 6 FL with MagneRide

Our Schropp Handling Pack combines two suspension upgrades that work particularly well together on the Mustang: our Eibach lowering springs manufactured specifically for Schropp and adjustable Eibach anti-roll bars at the front and rear.

Combined with MagneRide, this creates a highly capable yet road-friendly suspension setup. The factory adaptive damping system is retained, while the springs provide a sportier ride height and the uprated anti-roll bars reduce body roll and improve handling precision.

We also know what this setup can achieve from our customers' experience. One of our customers drives his MagneRide-equipped Mustang Mach 1 predominantly on the Nürburgring Nordschleife and has achieved impressive lap times for a road-legal car with our Handling Pack. This combination of everyday usability and genuine performance is one of the reasons why the Handling Pack has become one of our best-selling suspension upgrades.

Schropp springs without excessive rear lowering

Our lowering springs are manufactured by Eibach specifically for Schropp. We deliberately chose approximately 25 mm lowering at the front and 20 mm at the rear to give the Mustang a sporty but balanced stance.

This avoids the rear-heavy appearance that can result from some lowering spring combinations where the rear of the Mustang visually sits too low.

Eibach anti-roll bars – 3-way adjustable

The Handling Pack also includes Eibach anti-roll bars for the front and rear axle. The 35 mm tubular front bar and 24.5 mm tubular rear bar are both 3-way adjustable.

The uprated bars reduce body roll and improve precision through corners and quick direction changes. Their adjustability also allows the handling balance to be fine-tuned to the vehicle setup, tyres and intended use.

Important information for MagneRide vehicles

After installing the lowering springs, the MagneRide system must be recalibrated. Due to the changed ride height, the ride-height sensors and MagneRide control system need to be adapted to the new vehicle height to ensure that the adaptive suspension continues to operate correctly.

Product features

• Schropp lowering springs manufactured by Eibach
• Approx. 25 mm front / 20 mm rear lowering
• Balanced stance without excessive rear lowering
• Eibach 35 mm tubular front anti-roll bar, 3-way adjustable
• Eibach 24.5 mm tubular rear anti-roll bar, 3-way adjustable
• Reduced body roll and more precise handling
• Factory MagneRide system is retained
• MagneRide recalibration required after installation
• Proven by Schropp and our customers on road and track
• Supplied with German TÜV parts certificate up to 300 km/h

Vehicle applications

• Mustang 6 Facelift 2018–2023 with MagneRide
• 5.0 GT
• Bullitt
• Mach 1